Advertisement
Operating Humidity
Weight
Cable Length
Overload Conditions
Duty Cycle
Safety Standards
EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
600 V rms, Category III, Pollution Degree 2
Use of the clamp on uninsulated conductors is limited to 600 V ac
rms or dc and frequencies below 1 kHz.
CAT III equipment is designed to protect against the transients in the
equipment in fixed equipment installations, such as distribution
panels, feeders and short branch circuits, and the lighting systems in
large buildings.
EMC Standards
EN 61326 :1998 +A1, A2, & A3
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from
accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke's behalf. To obtain service
during the warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then send
the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow
the exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to
you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
11/99
15 % to 85 %
(non condensing)
650 g
1.6 meters
Operation above 1200 A
should be limited to
frequencies below 1 kHz
1500 A at 50 / 60 Hz for
1 hour, 33 % duty cycle
(20 min ON, 40 min OFF).
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
Advertisement
