Initial Setup - NCI 7815 User Manual

Initial Setup

Unpacking the Scale
Installing the Scale
Check container for any obvious evidence of
damage. Inspect the unit for shipping damage.
Immediately report any damage to the shipper.
1. Mount the unit on a stable, level surface that
is free from air currents and vibration. Be
sure the weigh platter does not touch any
adjacent surfaces.
2. To install the weigh platter flush with a
countertop, use the dimensions below to
guide your construction.
7815 Platform
Dimensions
4.2" Min. Ht.
3. Loosen the collars on the leveling feet. Level
the unit by using the level bubble under the
platter as a guide. Be sure all four feet are in
firm contact with the counter, then tighten all
collars.
4. Make sure all power cords, remote display
cables, etc. are not touching the live weighing
surface.
5. Plug the unit into an appropriate voltage
outlet, properly grounded.
Model 7815 Parcel Bench Scale User's Manual
14" W
12.5" D
Minimum Cutout
Dimensions
14.75" W
13.25" D
7