MSB Technology Universal Media Transport plus User Manual page 27

input the security key using the remote control. The player will then test the
connection and display the results.
• Manual – Allows you to manually enter the information for a wireless network.
You need to use the remote control to input the SSID, select the Security Mode
and input the Security Key. The player will then test the connection and display
the results.
• WPS – Starts the Wi-Fi Protected Setup. The UMT
supports the WPS standard to provide an easy and secure
establishment of a wireless home network. You may choose
from the following setup options:
• PIN – Configures the WPS using a Personal
Identification Number. The UMT will generate a PIN
code and you will need to input it into the software
control panel of your wireless router or access point.
Please follow the on-screen instructions.
• PBC - Configures the WPS using Push Button Control.
You need to push a PBC button on your wireless router or access point to initiate the wireless connection. Please follow
the on-screen instructions.
NOTE: SSID is short for Service Set Identifier. It is an identifier for each wireless router or access point, and is also referred as a network
name. WPS is short for Wi-Fi Protected Setup (WPS). It is the latest standard for easy and secure wireless home network configuration.
It is also named Wi-Fi Simple Config. To use WPS, a WPS compatible router or access point is required.
8. IP Setting: To determine how the player obtains its IP address. The available options are:
• Auto (DHCP) - The player automatically obtains its IP address information using DHCP (Dynamic Host Configuration Protocol).
This is the default setting. In most cases, automatic IP configuration can be used.
• Manual – Allows you to manually enter the numeric IP address. Set the IP configuration manually only when the router has
no DHCP server functions or when the router's DHCP server function is disabled. For more information on how to manually
configure the Internet connection and what values to use, please consult your broadband router/modem instruction manuals or
call your Internet service provider.
• Internet Connection – Depending on your choice in "Internet Connection" option, this can be "Wireless" or "Ethernet".
• IP Address: The Internet Protocol address of the player. When "IP Setting" is set to "Auto (DHCP)", the value displayed
here is obtained using DHCP and cannot be changed.
• Subnet Mask: Each IP address has an associated subnet mask. It is used by the player to decide whether to route network
traffic through the router or directly to another device on the same network. When "IP Setting" is set to "Auto (DHCP)",
the value displayed here is obtained using DHCP and cannot be changed.
• Gateway: The IP address of the router. It is also called "default gateway" or "default router". When IP Setting is set to Auto
(DHCP), the value displayed here is obtained using DHCP and cannot be changed.
• DNS 1: The IP address of the first (primary) DNS (Domain Name System) server. DNS is the mechanism to translate human-
readable addresses (such as www.msbtech.com) to numeric IP addresses. When "IP Setting" is set to "Auto (DHCP)", the
value displayed here is obtained using DHCP and cannot be changed.
• DNS 2: The IP address of the second (secondary) DNS server. When "IP Setting" is set to "Auto (DHCP)", the value
displayed here is obtained using DHCP and cannot be changed.
9. Proxy Setting: To configure the proxy server settings. The proxy server works as an intermediary for network communication between
clients and other servers, which can provide benefits like security, anonymity, speedup or circumventing regional restrictions.
• On – To access the Internet via a proxy server.
• Proxy Host: To enter the proxy host name using the remote control.
• Proxy Port: To enter the proxy host port number using the remote control.
• Off (default) – Do not use a proxy server.
10. Connection Test: To test the Internet connection. It is recommended that you test the connection when you initially connect the player
to the Internet, or whenever changes to "Connection Method", "Wireless Setting", "IP Setting" and other network parameters are
made.
27