Table of Contents
Advertisement
58
•
Select the Night mode if the network camera is connected at a place
where surrounding light is less or dark.
•
If we obtain lower frame rate than set we need to check from the
system administrator for suffi cient bandwidth available or reduce the
number of applications running on the client computer.
•
If the client PC's are unable to access the multicast stream, check with
the system administrator for the use of a valid multicast address or
check if the router is supporting multicasting.
•
If the images appear to have white of gray stripes on it, upgrade the
Video graphics driver on the client PC to the latest version.
•
Video images may be noisy if you are using the camera in a very low
light environment or the bit rate/quality is set to very low values.
Provide higher values for quality and support the surrounding
environment with enough light.
For all further support please contact the supplier or forums or websites.
Advertisement
Table of Contents
