Table of Contents
Advertisement
•
Camera ID: Enter the PTZ device ID. Make the same ID as the PTZ
Device.
•
Pan speed: Enter the panning speed of the PTZ device in the edit box.
Default value for the LG Multix Protocol is 60 and ranges from 0 to 127.
•
Tilt speed: Enter the tilting speed of the PTZ device in the edit box.
Default value for the LG Multix Protocol is 60 and ranges from 0 to
127.
•
Zoom speed: Enter the zoom speed of the PTZ device to view the
object close or at a distance. Default value for the LG Multix protocol is
1 and ranges from 0 to 3.
•
Focus speed: Enter the focus speed of the PTZ device to focus an
object clearly near or far. Default value for the LG Multix protocol is 1
and ranges from 1 to 3.
•
Preset tour park time: Enter the parking time.
Port
•
Baud rate: Select the desired speed of communication between the IP
device and the PTZ Device. Confi rm selected parameter to the baud
rate of the IP device.
•
Data bit: Set the number of the data bits for RS-485 communication.
•
Parity: Select the desired parameter. The parity bit, added to the data,
to perform parity check.
•
Stop bit: Enter the desired parameter. The stop bit, added to the last of
data, in asynchronous communication.
•
Save: Click this button to confi rm the settings.
33
Advertisement
Table of Contents
