Table of Contents
Advertisement
40
Master / Slave
•
RTP unicast: When enabled the transmission of the data to the
specifi ed equipment happens on a network specifying a single
address.
•
RTP multicast: When enabled it reduces the transmission load on
the camera by making the computer of the same segment network
receive the same transmission data. When multicast option is checked
then select Video Port number, Audio Port number and Data port
number.
-
Video RTP port: Specify the video transmission port number used
for the multicast streaming. It is initially set to 8 888 and you can
edit this between 1 025 and 65 534.
-
Audio RTP port: Specify the audio port number used for the
multicast streaming. It is initially set to 7 777 and you can edit this
between 1 025 and 65 534.
-
Data RTP port: Specify the VA data port number used for the
multicast streaming. It is initially set to 6 666 and you can edit this
between 1 025 and 65 534.
-
IP address: Set the IP address for RTP multicast.
Note:
Each stream using multicast needs its own a pair of multicast IP
address and port numbers to avoid address confl ict.
•
Save: Click this button to confi rm the settings.
Advertisement
Table of Contents
