Gateway Notebook Hardware Reference Manual page 49

www.gateway.com
Remove the bracket from the old drive.
17
Place the new drive, label side up, onto the bracket so the screw holes line
18
up.
Replace the screws that secure the bracket to the drive.
19
Slide the new hard drive kit into your notebook, then replace the screws
20
that secure the hard drive kit to the notebook.
Replace the hard drive bay cover, then tighten the cover screws.
21
Insert the battery(ies), then turn your notebook over.
22
Connect the optional port replicator.
23
-OR-
Connect the power adapter, modem cable, and network cable
Turn on your notebook.
24
For instructions on installing Windows, your drivers, and your applications,
25
see the "Recovering Your System" chapter you printed in
Replacing the hard drive kit
Step 2.
45