Gateway Convertible notebook Reference Manual page 104

4
5
6
7
8
9
96
CHAPTER 7: Maintaining Your Notebook
Insert a blank, recordable disc into the recordable disc
drive, then click or tap Next. If an AutoPlay dialog box
opens, click or tap the x in the upper-right corner to
close it.
A dialog box opens that tells you the number of blank
discs you need to create a full set of recovery discs.
If you have enough blank discs of the specified type,
click or tap I have enough discs, then click or tap Next.
If you do not have enough discs, choose a different disc
type, or click or tap Cancel.
The disc recording begins. Label the discs as they are
completed.
Important
Use a permanent marker to label each disc "Software and Driver
Recovery," along with a short description of which convertible notebook
the discs are for. If you are recording multiple discs, as you remove each
disc from the drive, use the marker to label each disc 1 of x, 2 of x,
3 of x, and so on.
Tip
After a recovery disc is created, your convertible notebook names
the disc Recovery13 for disc 1 of a 3-disc set, Recovery23 for disc
2, and so on.
If multiple discs are required, insert the additional blank
disks when prompted.
When the process is finished, the Congratulations!
window opens.
Click or tap Finish.
Remove your final disc, then label all of the discs and
store them in a safe place.