Datavideo SE-2800 Instruction Manual page 4

How to update the SE-2800 Firmware ............................................................................ 34
How to Re-calibrate the SE-2800 T-Bar .......................................................................... 38
How to change the SE-2800 video standard .................................................................. 39
Example SE-2800 Set Up ................................................................................................. 43
Dimensions ....................................................................................................................... 43
Specification ..................................................................................................................... 44
Service and Support ........................................................................................................ 45
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to
give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this
manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or
incorrect information. Datavideo Technologies always recommend that you double check the information in this document for
accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or
dealer.
4