Installing The Memory (Dimm) - IBASE Technology IB800 User Manual

INSTALLATIONS

Installing the Memory (DIMM)

The IB800 CPU Card supports three 168-pin DIMM sockets for a
maximum total memory of 3GB in SDRAM type. The memory module
capacities supported are 32MB, 64MB, 128MB, 256MB, 512MB and
1GB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the CPU card and
perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2. Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3. To remove the DIMM, press the clips with both hands.
Lock
Lock
8
DIMM
Top View of DIMM Socket
IB800 User' s Manual
Lock
Lock