Standard Cmos Setup - IBASE Technology IB800 User Manual

Standard CMOS Setup

"Standard CMOS Setup" choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the CPU card is already installed in a working
system, you will not need to select this option. You will need to run the
Standard CMOS option, however, if you change your system hardware
configurations, the onboard battery fails, or the configuration stored in
the CMOS memory was lost or damaged.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It will
display the relevant information to help you. The memory display at the
lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following describes
each item of this menu.
Date
The date format is:
Day :
Month :
Date :
Year :
To set the date, highlight the "Date" field and use the PageUp/ PageDown
or +/- keys to set the current time.
Standard CMOS Features
Tue, Mar 26 2001
00 : 00 : 00
Press Enter 13020 MB
Press Enter None
Press Enter None
Press Enter None
1.44M, 3.5 in.
None
EGA/VGA
All Errors
640K
129024K
130048K
Sun to Sat
1 to 12
1 to 31
1994 to 2079
IB800 User' s Manual
BIOS SETUP
Item Help
Menu Level
Change the day, month,
Year and century
31