14 | HVE1/HVE4/HVE8 Encoders Getting Started Guide
About the Encoder
HVE1(X)
Front Panel
Interface Element
1
PWR LED Indicator
2
VIDEO IN
3
LINE IN
4
AUDIO OUT
5
microSD
6
RESET
www.honeywell.com/security
Figure 4
HVE1 Front Panel
Table 2
HVE1 Front Panel
Function
Lights red when the device is powered on.
Lights orange when an SD card is inserted.
BNC connector for video input.
3.5mm connector for two-way audio input. Connect to an audio input
device or an active pick-up, a microphone, etc.
3.5mm connector for audio output. Connect an audio output device,
such as a loudspeaker.
microSD interface for data storage, up to 32GB, Class 6 and above.
Restore to the factory default settings by holding the RESET button for
more than 15 seconds after the power is turned on.