Honeywell HVE1 Getting Started Manual page 19

3. Click to start Live View for all of the cameras in the device list.
Opening and Closing Full-Screen Mode
You can double-click on the live video to switch to the full-screen view mode. To switch back to the normal mode,
double-click on the live video again.
Figure 15 Live View Window
Table 9 Controls on the Live View Window
Icon Function
Select the viewing window division.
Start/stop live view.
Capture pictures in the live view mode.
Manually start/stop recording.
Enable PTZ control (must be supported by the connected camera)
Previous/next page.
Audio on/off.
Start/stop two-way audio.
Note Before using two-way audio or recording with audio, please configure the Stream
Type to Video & Audio under Remote Configuration

Settings Video Settings.
| 25

Camera
800-15611V2 - A - 10/2013