Browsing Objects; Advanced Startup Topics; About Object Numbering - Grecom PSR-310 Owner's Manual

Browsing Objects

The 5-way pushbutton pad makes it easy for you to browse the stored ob-
jects in your PSR-310 when in Manual or Program modes. Press MAN or
PGM, then use the 3456 keys on the 5-way pushbutton pad to move
around in the scanner's memory as follows:
navigates "up" through the objects assigned to the current Scan
5:
List
navigates "down" through the objects assigned to the current
6:
Scan List
navigates "up" through the active Scan Lists in the radio
4:
navigates "down" through the active Scan Lists in the radio
3:

Advanced Startup Topics

Congratulations! Now that you have mastered the creation of Scannable
Objects and how to monitor them using Scan and Manual Mode, you can
move on to some more advanced startup topics.
This Advanced Startup Topics section of this manual will provide you with
more basic information about how you can create other types of Scan-
nable Objects, and how you can group your Scannable Objects into dif-
ferent Scan Lists and work with the Scan Lists to quickly enable or disable
groups of objects that you want to monitor. You can also read the Detailed
Menu Reference section of this manual to learn more about the different
object types and their parameters, and how to perform more advanced
operations with your scanner.

About Object Numbering

Your PSR-310 is different from other types of scanners in how it stores
your Scannable Objects in memory. Instead of fixed channels and banks,
objects are stored in the first available block of free memory and assigned
an Object ID. The Object ID is the "address" where the object is stored in
memory.
The Object ID is displayed as a four digit number in the upper left-hand
corner of the display whenever an object is selected in Manual Mode and
PGM modes, and when the scanner stops on an active object while scan-
ning. Additionally, the current Scan List number is displayed prior to the
Object ID when an object is selected in Manual Mode or PGM mode, i.e.,
10-0348
indicates Object ID 0348 mapped to Scan List 10.
36