Grecom PSR-310 Owner's Manual page 46

Save softkey to save the modified object. Objects can be members of as
many Scan Lists as you see fit, without limitation to the number of Scan Lists
an object is mapped to, and without limitation to the number of objects that
are mapped to a given Scan List.
To change Scan List membership for an existing object, press the PGM key.
Use the 3456 keys on the 5-way pushbutton pad to scroll to the exist-
ing object that you wish to change, then press the EDIT softkey. Press the
CURR softkey to edit the current object.
NOTE: Remember, when browsing objects in Manual or Program Mode, the
arrow keys on the 5-way pushbutton pad operate as follows:
5: navigates "up" through the objects assigned to the current Scan List
6: navigates "down" through the objects assigned to the current Scan List
3: navigates "up" through the active Scan Lists in the radio
4: navigates "down" through the active Scan Lists in the radio
Scroll down in the object's parameters menu to the Scan Lists: field.
With the Scan Lists: field highlighted, use the 4 on the 5-way push-
button pad to scroll through the Scan Lists, and use the SEL button to tog-
gle membership for a Scan List on or off. The asterisk (*) next to the Scan
List number indicates that the object is a member of that Scan List. Press
the Save softkey to save the modified object.
Naming, enabling and disabling Scan Lists
By default, Scan Lists are named "Scan List 01 - Scan List 20". If desired,
you can give your Scan Lists names to describe their function. Press PGM,
then press the GLOB softkey and scroll down to the Scan Lists parameter.
Press the SEL key to display the Scan Lists sub menu. Scroll to the desired
Scan List and press the 4 key to edit the settings for the selected Scan
List, Scroll to the Tag field and press the 4 key to edit the name. Press the
Done softkey when finished, then press the Save softkey to save the
changes to the Scan List sub menu, then press the Save softkey again to
save the changes to the Global menu. Scan Lists may be enabled or dis-
abled while actively scanning, or by accessing the individual Scan List in the
Global Settings (GLOB) menu.
To toggle a Scan List's enabled/disabled status while scanning, press the
numeric key that corresponds with the Scan List you wish to toggle. For ex-
ample, pressing 4 while scanning will toggle the state of Scan List 04 from
enabled to disabled, or vice versa if the Scan List is already disabled. To
toggle the enabled/disabled status for Scan Lists 11-20, press FUNC, then
press a number key, i.e., press FUNC 3 to toggle the status of Scan List 13.
If you enable a Scan List that has no assigned objects, the number for that
Scan List will flash in the display while the scanner is scanning.
46