Grecom PSR-310 Owner's Manual page 79

HINT: You can restore all GLOB settings to their defaults without affecting
your programmed objects. Power cycle the radio, then press 0, then 2 dur-
ing the welcome message display. Press ENT to confirm the GLOB param-
eter reset.
GLOB Parameter Options
CONTRAST
Owner
Font
Clone Send
Alert Mode
Sound Mode
Key Beeps
Light Mode
Light Area
Light Secs
1-7
SEL
Normal, Bold
SEL
Both, Tone, Light, Off
On or Stlth
On or Off
Norml, Key, Ignre, On,
Stlth
Both, LCD, Keybd
1-99 seconds
Description
Sets LCD contrast. Use 34 keys
on 5-way pushbutton pad.
Enters sub menu to set Welcome
Message text display.
Sets displayed font. Use 34 keys
on 5-way pushbutton pad.
Press SEL to send data using
clone mode
Controls the ALERT LED and Au-
dible Alarm behavior. Both allows
the LED and Tone. Tone allows the
audible alarm only. Light allows
the LED only. Off deactivates the
ALERT LED and Audible Alarm fea-
ture.
Controls all radio beeps.
Controls key beeps.
Controls the backlight operation.
Norml (Normal) uses the back-
light key on the keypad. Key acti-
vates the backlight when any key
is pressed. Ignore activates the
backlight when a key is pressed,
and that key's normal function is
ignored if the backlight is off when
it is pressed. On causes the back-
light to remain on all the time. Stlth
(Steath) disables the backlight.
Controls what area is illuminated
when the backlight is on. Both il-
luminates the LCD and the keypad,
LCD illuminates the display only.
Keybd (Keyboard) illuminates the
keypad only.
Controls the amount of time the
backlight remains on for Normal,
Key and Ignore light modes
79