Object Lockout - Grecom PSR-310 Owner's Manual

To filter browse for a specific type of object, press the softkey that corre-
sponds with that object type. For example, press the CONV softkey, then
use the 3456 keys on the 5-way pushbutton pad to browse only conven-
tional objects.

Object Lockout

The L/OUT key is used to lock out objects. When an object is locked out,
traffic is not received on that object until it is unlocked, even if the object
is mapped to more than one Scan List. Locking out an object locks it out
"radio-wide" until it is enabled by toggling the lockout setting.
Four types of lockout functions are available in the PSR-310, temporary lock-
out, permanent lockout, search lockout and talkgroup lockout.
Temporary Lockout
Temporary lockout locks out an object until the scanner is turned off. When
the scanner is powered on again, all objects that have been temporarily
locked out are restored.
By default, the L/OUT key activates temporary lockout when pressed. If
desired, you can change the function of the L/OUT key in the GLOB ra-
dio wide settings by pressing PGM, then the GLOB softkey. Scroll to the
L/O setting and press the 4 key to toggle the setting to
TLO=FUNC
YES to have the L/OUT key function as a permanent lockout instead of tem-
porary lockout.
To apply temporary lockout to an object, press the L/OUT key while the
scanner is stopped on that object during scan operation, or navigate to an
object using the 5-way pushbutton pad while in Manual Mode or PGM mode
and press the L/OUT key. The lowercase " l " in the display flashes to indi-
cate that temporary lockout is applied to the object:
If you wish to remove temporary lockout from a single object, navigate to the
object using the 5-way pushbutton pad while in Manual Mode or PGM mode
and press the L/OUT key again.
49