Conv Menu Reference - Grecom PSR-310 Owner's Manual

Search Delay
TLO=FUNC L/O Yes or No
DupeChecksSQ
TGID Format
TGRP Ignore
ShowCCInfo
Set password

CONV Menu Reference

The CONV menu is used when creating new Conventional Channel objects,
or editing existing Conventional Channel objects. All menus are shown in
the scanner's display as a three line window that can be scrolled up or down
to access the various different parameters. The active parameter is always
the middle parameter and is indicated by a flashing " : ". The entire CONV
menu is shown below:
CONV Parameter Options
Scan Lists
Freq
82
1-100 x 100 mS
Yes or No
Norm, DEC or HEX
Yes or No
Yes or No
SEL
On or Off for Scan
Lists 01-22
Any supported fre-
quency in MHz
Sets wait for reply delay for all
search modes
Controls the operation of the L/OUT
key. When No, pressing L/OUT per-
forms a Temporary Lockout of the
selected object. When Yes, press-
ing L/OUT performs a Permanent
Lockout of the selected object.
If set to Yes, dupe checking will
check both the stored frequency
and any encoded squelch settings
when checking for duplicate CONV
objects.
Selects TGID display format
If set to Yes, TGRP wildcards will
ignore calls on previously stored
TGRPS that are mapped to dis-
abled Scan Lists.
For Motorola systems, shows cur-
rent control channel index (from
TSYS frequency list) and frequency
alternating with the voice frequency.
Sets the power-on password.
Description
Sets membership in Scan Lists. Use
34 keys to scroll through Scan
Lists. Use SEL key to toggle Scan
List membership. A " * " next to the
Scan List number indicates that the
object is mapped to that Scan List.
The frequency that the CONV ob-
ject will use.