Transfer; Recall Line Display - Nitsuko Portrait308 Pocket Manual

TRANSFER

308 Available
Transfer permits an extension user to send (i.e., extend) an
active outside call to any other extension in the system.
With Transfer, any extension user can quickly send an out-
side call to the desired co-worker.
A call a user transfers automatically recalls if not picked up
at the destination extension. If programmed, Transferred
calls that ring the extension longer than the recall timer
interval will ring station #10/attendant. This assures that
users do not lose or inadvertently abandon their transfers.
A display phone can be set to the Recall Line Display
Mode. When a transferred call is not answered, the call re-
rings your phone. The display will show the line and station
number of the recalling line.
A user may Transfer a call screened or unscreened. With
Screened Transfer, the transferring user announces the call
to the destination user before hanging up. With Unscreened
Transfer, the call is Transferred without an announcement.
Conditions: None
Default Configuration: Transfer always allowed.
Programming
Required Programming
None
Other Programming
Program 16 - System Options (2) - [B.] Recall Line
Preference
Enable or disable Recall Line Preference [0=disabled,
1=enabled].
Program 23 - Unscreened Transfer Recall
Program how long an Unscreened Transfer rings the
receiving extension before recalling the transferring
extension [000=disabled, 001-255=10-2550 seconds].
Program 24 - Screened Transfer Recall
Program how long an Screened Transfer rings the receiv-
ing extension before recalling the transferring extension
[000=disabled, 001-255=10-2550 seconds].
156
824 Available