Appendix; Interrupting A Copy Job; To Interrupt Copying - Minolta Di2010f User Manual

4
4.4

Interrupting a Copy Job

The current copy job can be paused so that a copy of a different document can be
made.
This is convenient if you wish to quickly make copies of a short document while a
large job is being printed.
Note
If certain functions are specified, it may not be possible to interrupt the copy job.
In addition, some functions are not available while a copy job is interrupted.
For details, refer to the "Function Combination Table" of "Appendix" in the Ad-
vanced Operations volume of the User Manual.

To interrupt copying

1
Press the [Interrupt] key while a
job is being printed.
❍
The indicator on the [Interrupt]
key lights up.
❍
The message "Now in the interrupt mode." appears.
❍
The copy settings return to their defaults.
(The copy settings of the job before the interruption and the remaining
number of copies are recorded.)
❍ If no operation is performed for one minute after the [Interrupt] key is
pressed, the Interrupt mode is automatically cancelled.
2
Position the document(s) to be copied.
3
Select the desired copy settings.
4
Press the [Start] key.
❍ Scanning of the document begins.
5
Press the [Interrupt] key.
The indicator on the [Interrupt] key goes off and the Interrupt mode is cancelled.
The copy settings for the job before copying was interrupted appear, and
copying of the job that was interrupted automatically continues.
4-6
4.4 Interrupting a Copy Job
Di2010f/Di2510f/Di3010f/Di3510f