DBLTek ROIP302 Series User Manual page 29

ROIP302 Series User menu
3. The DDNS feature should be disabled.
4. In the router configuration, DMZ mode should be configured to IP address of the RoIP302.
5. The Call Settings should be configured according to the example shown below.
SIP Number must be unique for each RoIP302.
RoIP302M. The Auto Dial Number should be set to the Group SIP Number of the
RoIP302M.
6.The Group Codec Setting must be set to G.729.
7. Repeat the above with other RoIP302s and a RoIP network with a maximum of 13 locations
can now be achieved.
8. If more locations are needed, it is possible to connect another RoIP302M to the master
RoIP302M.
feature enables a much bigger and more flexible system to be built.
demonstrates the concept of building such system.
9.
This is the number to be called when the GM300 Radio is talking.
Then more RoIP302s can then be connected to the second RoIP302M.
The SIP Proxy should be set to the IP of the
The diagram below
The Group
This
www.dbltek.com