DBLTek ROIP302 Series User Manual page 28

ROIP302 Series User menu
6. Since the QSL output of the ICOMIC-2720 is active high, then the PTT Settings should be
configured as shown below.
7. Since the RoIP302M needs to be connected with multiple RoIP302s, the voice codec G.729
should be selected in order to lower the network bandwidth requirement.
8. Up to 3 groups can be defined in the Group Settings. Each group consists of remote
RoIP302 clients (referred as Soft Lines here) and onboard channels (PTT1, PTT2, PTT3,
GSM). Similar to RoIP302, each onboard channel can only be assigned to one group.
RoIP302M can at the most accept up to 12 client registrations.
clients (Soft Lines) are split among the 3 groups.
assigned to Group 1 and this means that there are no more lines available for group 2 and 3.
Setting up a RoIP302:
1. The connection of GM300 to RoIP302 is the same as the one shown in Example 1.
2. The Network Setting is the same as that shown in Example 1.
This means that these 12
In the example below, 12 Soft Lines are
www.dbltek.com