DBLTek ROIP302 Series User Manual page 12

ROIP302 Series User menu
e)Switch Port
The cell Phone SIM slot is located at the bottom of the device.
the bottom to access the SIM card holder.
upward. Please the SIM card properly with the cut corner pointing to the edge of the device.
Place the clip over the SIM card and then slide it forward to lock the clip.
g)Main Unit Setup
i. Connect the Switch Port to an external system for remote control.
and off a Public Announce (PA) system to instant broadcast. If the relay switch is
connected to high voltage load.
500 mA load current.
ii. Connect the Channel Port to a Radio Channel via the PPT Adapter Cable provided.
channels are supported.
The built-in relay switch is connected to the middle two pins of
the RJ-11 socket.
system connected.
f) SIM Card Slot
The maximum rating for the internal relay is 240VAC and
It acts as an ON/OFF switch for the external
Slide the metal clip backward and the lift the clip
Remove the plastic cover at
It can be used to switch on
Up to 3
www.dbltek.com