DBLTek ROIP302 Series User Manual page 14

ROIP302 Series User menu
6 Device Configuration Via Built-in Web Server
The built-in web server provides a comprehensive way to fully program the device manually.
6.1 Web Server Login
There are two methods to access the built-in web server.
Method 1 is to access the built-in web server via the LAN port.
LAN port of the RoIP302 and configure its IP to 192.168.8.x (x = 2 to 254). Type the IP
address 192.168.8.1 in the address field of a web browser.
-displayed.
Enter the User name and the Password now. The user name for the administrative level is
"admin" and the default password is "admin".
Please make sure to click on "Save Changes" after configuring the device.
Method 2 is to access the built-in web server via the WAN port.
mode as a default factory setting.
obtains an IP address automatically from the host.
call to the GSM SIM card number.
to ask for password. Dial "*00" and the device then reads out the WAN port IP address.
When it is first connected to a network with a DHCP host, it
In order to listen to the IP obtained, make a
Once the call is answered, the device plays a voice prompt
Connect a computer to the
The following login window is then
The WAN port is set to DHCP
www.dbltek.com