DBLTek ROIP302 Series User Manual page 18

ROIP302 Series User menu
as provided by your ISP to complete this LAN port configuration.
The PC Port allows other network devices to be attached to the GoIP4 Gateway. It offers both
Bridge and Static IP modes to meet your requirements.
the IP address 192.168.8.1.
1）Bridge Mode
Select Bridge mode if your network topology requires the network devices (PC or others) to be
in the same network segment as the GoIP4 Gateway.
as an Ethernet Switch.
2）Static IP Mode (Default Setting)
Select Static IP mode for a new network segment on PC port.
functions as Router. Enter the IP address in IP Address field with a new segment address that is
different from that on the LAN port.
A commonly used value is 255.255.255.0.
Enable the DHCP Server if you want the GoIP4 Gateway functions as a local DHCP host on PC
port. This will enables the GoIP4 Gateway to assign IP Addresses to network devices that are
attached to the PC port.
The factory preset is Static IP mode with
In this case, the GoIP4 Gateway functions
Enter the subnet mask in
In this case, the GoIP4 Gateway
Subnet Mask field accordingly.
www.dbltek.com