Call Settings - DBLTek ROIP302 Series User Manual

ROIP302 Series User menu
Specify the Starting Address, Ending Address, and Static DNS accordingly.
6.5

Call Settings

The RoIP302 supports up to 3 groups with a unique Group SIP Number. Each RoIP302 must
define at least one group.
PTT ports. If the RoIP is connected to a SIP server, then this number is assigned by the SIP server
administrator. If a peer-to-peer configuration is used, then this number must be unique and is
assigned by the user arbitrary.
For SIP Proxy mode, each RoIP302 are designated as a terminal.
program the key parameters. Other parameters should be programmed as required by the SIP
proxy.
Group SIP Number
SIP Proxy
Auto Dial Number
The Group SIP Number is the only reference between a group and the
SIP Proxy Mode Settings
The table below describes how to
RoIP302 Terminal
Assigned by the SIP Proxy
administrator
SIP Proxy IP or domain name
The Group SIP Number of the
RoIP for voice connection to be
established when a PPT signal
defined in the PPT Setting is
active.
www.dbltek.com