Gsm Settings - DBLTek ROIP302 Series User Manual

ROIP302 Series User menu
6.7

GSM Settings

The GSM settings in this section mainly define the password for incoming and outgoing GSM calls.
If it is left blank, then no password is required.
The voice activation detection settings are listed below.
feature yet.
6.8
Recording Settings
The recording settings define the address of the recording server for each group.
RoIP Voice Recording User Manual for more information.
6.9
Public Announce (PA) Settings
The RoIP302 provides a relay switch to control a PA system.
ON Password, it turns on the relay to activate the PA system.
at this time. When the RoIP302 receives the PA OFF Password, it turns off the relay to deactivate
the PA system. The duration for the relay to be in the ON state is limited by the value set in the
parameter PA ON Expiry. This mechanism shuts down the PA System automatically. The PA
Control Group defines which group has the control over the relay switch.
in the group specified can broadcast to the PA System.
This firmware version does not support this
When the RoIP302 receives the PA
Audio is transmitted to the PA system
Only the radio terminals
Please refer to the
www.dbltek.com