Technical Specifications - HP 5500 HI Quickspecs

QuickSpecs

Technical Specifications

HP 5500-24G-4SFP HI Switch with 2 interface Slots (JG311A)
Ports
Power supplies
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
RJ-45 out-of-band management port
Supports a maximum of 38 autosensing 100/1000 ports, with optional module
2 power supply slots
1 minimum power supply required (ordered separately)
Dimensions
Weight
1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Maximum heat
dissipation
Maximum power rating
Notes
DA - 14201 Worldwide — Version 20 — April 15, 2014
17.32(w) x 14.17(d) x 1.72(h) in (44.00 x 36.00 x 4.37 cm) (1U height)
16.53 lb (7.5 kg), Fully loaded
< 5 µs
< 3 µs
130.9 million pps
176 Gbps
12000 entries (IPv4), 6000 entries (IPv6)
32000 entries
32°F to 122°F (0°C to 50°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Low-speed fan: 47.9 dB, High-speed fan: 51.1 dB; ISO 7779
50/60 Hz
481 BTU/hr (507.46 kJ/hr)
141 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
HP 5500 HI Switch Series
Page 22