HP 5500 HI Quickspecs page 26

QuickSpecs
Technical Specifications
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Notes
Services
Dimensions
Weight
1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Maximum heat
dissipation
Maximum power rating
PoE power
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943
EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR
47) CLASS A; YD/T993
8-port Gig-T and SFP modules (JG313A and JG314A) are supported only in slot 1 of this switch.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
DA - 14201 Worldwide — Version 20 — April 15, 2014
17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height)
22.05 lb (10 kg), Fully loaded
< 5 µs
< 3 µs
up to 130.9 million pps
176 Gbps
12000 entries (IPv4), 6000 entries (IPv6)
32000 entries
32°F to 122°F (0°C to 50°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Low-speed fan: 41.0 dB, High-speed fan: 64.0 dB; ISO 7779
50/60 Hz
460 BTU/hr (485.3 kJ/hr)
150 W
740 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the maximum power available from the required power supply or
supplies. Device supports 1 or 2 internal modular power supplies. JG544A will
supply up to 435 watts of PoE+ power per installed unit. JG545A will supply up
to 800 watts of PoE+ power per installed unit to the extent needed by the
installation.
HP 5500 HI Switch Series
Page 26