HP 5500 HI Quickspecs page 28

QuickSpecs
Technical Specifications
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Services
Dimensions
Weight
1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Maximum heat
dissipation
Maximum power rating
PoE power
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943
EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR
47) CLASS A; YD/T993
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR580E)
DA - 14201 Worldwide — Version 20 — April 15, 2014
17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height)
23.15 lb (10.5 kg)
< 5 µs
< 3 µs
up to 166.6 million pps
224 Gbps
12000 entries (IPv4), 6000 entries (IPv6)
32000 entries
32°F to 113°F (0°C to 45°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
Low-speed fan: 43.1 dB, High-speed fan: 66.1 dB; ISO 7779
50/60 Hz
666 BTU/hr (702.63 kJ/hr)
195 W
1440 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies. Device supports 1 or 2 internal
modular power supplies. JG544A will supply 435 watts of PoE+ power per
installed unit. JG545A will supply up to 800 watts of PoE+ power per installed
unit.
HP 5500 HI Switch Series
Page 28