Comtech EF Data Vipersat CDM-570 User Manual page 98

V i p e r s a t C o nf i g u r a t i o n
Caution: This command affects all communications for the VMS and STDMA.
If the base address is changed, it must be changed in the VMS as
well as in all modems in all networks controlled by the VMS. The base
address must also be changed when using VLOAD with this network.
V i p e r s a t C D M - 5 7 0 / 5 7 0 L U s e r G u i d e
3-62