AirLive SD-2020 User Manual
  1. Manuals
  2. Brands
  3. AirLive Manuals
  4. IP Camera
  5. SD-2020
  6. User manual

AirLive SD-2020 User Manual

2-megapixel 20x optical zoom speed dome ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SD-2020
2-Megapixel 20X
Optical Zoom Speed
Dome IP Camera
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SD-2020 and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive SD-2020

Summary of Contents for AirLive SD-2020

  • Page 1 SD-2020 2-Megapixel 20X Optical Zoom Speed Dome IP Camera User’s Manual...
  • Page 2 OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide. However, we are not liable for the inaccuracies or errors in this guide. Please use with caution. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive SD-2020 User’s Manual...

  • Page 3: Fcc Statement

    FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. AirLive SD-2020 User’s Manual...

  • Page 4: Table Of Contents

    5. Configuration of Main Menu..............20 5.1 Live View....................21 5.2 System....................24 5.3 Streaming...................24 5.4 PTZ ....................24 5.5 Logout....................24 6. System ......................25 6.1 System....................25 6.2 Security....................27 6.3 Network....................33 6.4 DDNS....................39 6.5 Mail ....................40 6.6 FTP ....................41 6.7 HTTP ....................41 AirLive SD-2020 User’s Manual...
  • Page 5 8. PTZ ......................73 8.1 Preset ....................73 8.2 Cruise ....................74 8.3 Auto Pan ....................75 8.4 Sequence...................77 8.5 Home ....................78 8.6 Tilt Range...................79 8.7 Privacy Mask ..................80 8.8 Camera-Exposure................82 8.9 Camera-WB ..................83 8.10 Camera-Misc1 ..................85 8.11 Camera-Misc2 ..................87 AirLive SD-2020 User’s Manual...
  • Page 6 Table of Contents 8.12 Camera-Default ................89 9. Appendix....................90 A. Video Resolution .................90 B. Smart Tracking (Optional)..............99 AirLive SD-2020 User’s Manual...

  • Page 7: Overview

    Internet, and it is only one of benefits for using SD-2020 IP Camera. It is also equipped with PoE port which allows power and data to be transmitted via a single Ethernet cable. This useful function provides an easier installation, lower cabling costs and allows placement of AirLive PoE cameras in locations without access to electrical source.

  • Page 8: Product Specification

    Pan/Tile Control Preset Points-Up to256 preset point Camera Tour-Up to 8 tours Analog Video None Video H.264 HighProfile / MainProfile / Baseline / MJPEG Video Compression Video Profile Resolution and 30FPS @ 1280 x 1024 (4:3) AirLive SD-2020 User’s Manual...
  • Page 9 Up to 20 simultaneous users Power LED Amber Color Link/Act. LED Green Color/Flash Green LED and Button Reboot and Factory Default (Push and Hold default Reset Button button then plug in power) Network DSP Base General Processor System ROM 1GB(Flash) AirLive SD-2020 User’s Manual...
  • Page 10 Alarm Triggers Intelligent video motion detection and external input File upload via FTP, email, SD card Notification via email, HTTP, and TCP Alarm Events External output activation Audio alerting output Continuous Recording Windows VISTA / Windows XP / Windows 7 Viewing System AirLive SD-2020 User’s Manual...

  • Page 11: System Requirement

    Window XP, Vista or Windows 7 System Web Browser Internet Explorer 6 or later; Apple Safari; Firefox; Google Chrome Note: Please keep updating the latest Windows software and service package. (Ex: Net Framework, Windows Media Player, Enhance ActiveX Security) AirLive SD-2020 User’s Manual...

  • Page 12: Package Contents And Installation

    0 degree Celsius, please purchase the optional power adapter for the heater to work. Switch/Connector There are various connectors located on AirLive SD-2020’s back plate as shown in the figures below. Please refer to the diagrams and tables accompanied with for using of each switch / connector.
  • Page 13 This LED is used to indicate whether DC power is on or not. 2. Alarm I/O: AirLive SD-2020 supports 4 digital alarm inputs and 2 digital alarm outputs. Please make sure the alarm connections are properly wired before starting to configure alarm related settings in section “System Application (Alarm Settings).”...
  • Page 14 Note: Supply the power to the Network Camera with the power adapter, which is Not included in package. 4. Audio I/O Connectors Please refer to the illustrations below to set up the audio according to the audio pin definition. AirLive SD-2020 User’s Manual...

  • Page 15: Mounting The Camera

    2.3 Mounting the Camera Attaching the Standard Mount Kit - AirLive ACC-WMK-SD20 (Optional) Fix the camera with bundle wall mount kit as below. Wall Mounting: Follow the steps below to mount AirLive SD-2020 with the Standard Wall Mount. AirLive SD-2020 User’s Manual...
  • Page 16 Waterproof Rubber to the joint. Connect the cable(s) to AirLive SD-2020. Join AirLive SD-2020 to the Mounting Kit with the supplied screw and washers. Connecting to LAN (“A”) You can use the provided Ethernet cable to connect the camera to your local area network (LAN).

  • Page 17: Connect To Ip Camera

    AC power. 2.4 Connect to IP Camera 1. Insert the bundle CD into your PC/Laptop. 2. Auto Run Screen then shows up; click “Install Software “IPWizard II” to install the configuration tool software. AirLive SD-2020 User’s Manual...
  • Page 18 2. Package Contents and Installation AirLive SD-2020 User’s Manual...
  • Page 19 2. Package Contents and Installation 3. After completing installation, run the configuration tool software. 4. The Software scans the network and finds the IP Camera and then lists them in the dialog box. AirLive SD-2020 User’s Manual...
  • Page 20 5. If the Camera’s IP address is in the same IP segment as your LAN, select the founded IP Camera and double click on the item. Then, the default browser will show up and connect to the IP camera’s Web automatically. AirLive SD-2020 User’s Manual...

  • Page 21: Using Ip Camera Via Web Browser

    You can change them in the Account Menu. (Please check “System → Security → User”) 3. The monitor image will be displayed in your browser. In the top side of main configuration are “System”, “Streaming” and “PTZ”. For more details, you can check the following chapters. AirLive SD-2020 User’s Manual...
  • Page 22 3. Using IP Camera via Web Browser AirLive SD-2020 User’s Manual...

  • Page 23: Operating Ip Camera Via Mobile Phone

    You can access to your IP camera via your iPhone. Please follow the setting process below. Then you can see the live view via iPhone. 2. Execute AirLive CamPro Mobile 1. Download AirLive CamPro Mobile from APP store 3. Click Setup button. 4. Setup page appears AirLive SD-2020 User’s Manual...
  • Page 24 4. Operating IP Camera via Mobile Phone 5. Click Add button.   Click LAN button and select the camera. AirLive SD-2020 User’s Manual...
  • Page 25 10. The video appears on the main screen. 9. Click Live View button. Note: App for Android will be available in 11/2013. Note: The image is continuous snapshots, not video. Thus, live image can’t be recorded here. AirLive SD-2020 User’s Manual...

  • Page 26: Configuration Of Main Menu

    In the top side, you can control Live View in your main Browser. The functions include below. Live Video Pane Language Time Display Display Mode Video Compression Info Control Panel Web Recording Button Video Streaming Pause Button Snapshot Button Speak Button Talk Button AirLive SD-2020 User’s Manual...

  • Page 27: Live View

    <File Location> page. The default storage location for the web recording is: C:\. NOTE: For users with Windows 7 operating system, it is required to log on as an Administrator to implement the Web Recording function. AirLive SD-2020 User’s Manual...
  • Page 28 <Far> buttons. The status will also be displayed above the screen as shown below. 4. Pan/Tilt Control Users can implement pan/tilt control by first moving the cursor to the live video pane; then left click and drag the pointer in any direction. AirLive SD-2020 User’s Manual...
  • Page 29 / out on the image. Digital zoom is only available when the function is activated and which is set in <Camera-Misc1> page under the <PTZ> tab. Furthermore, after clicking the <Control Panel> Button, the Control Panel will be shown as the figure below. AirLive SD-2020 User’s Manual...

  • Page 30: System

    In the top side of main configuration, you can see Logout as below. Click on the tab <Logout> on the top of the page, and the login window will pop up. This enables login with another user name. AirLive SD-2020 User’s Manual...

  • Page 31: System

    The name is for camera identification. If alarm function is enabled and is set to send alarm message by Mail / FTP, the host name entered here will display in the alarm message. 2. Time Zone Select the time zone from the drop-down menu. AirLive SD-2020 User’s Manual...
  • Page 32 NTP server. Please specify the server that is wished to synchronize in the center field. Then select an update interval from the drop-down menu. For further information about NTP, please see the web site: www.ntp.org. NOTE: The synchronization will be done every time the camera boots up. AirLive SD-2020 User’s Manual...

  • Page 33: Security

    <Save>, the web browser will ask the Administrator for the new password for access. The maximum length of the password is 14 digits. For the first time use (default value), input the User Name: admin Password: airlive NOTE: The following characters are valid: A-Z, a-z, 0-9, !#$%&’-.@^_~. AirLive SD-2020 User’s Manual...
  • Page 34 Select a user name from the drop-down user list and click on <Edit> to edit the user’s password and privilege. NOTE: It is required to enter the User password as well as select the function open to the user. When finished, click on <Save> to modify the account authority. AirLive SD-2020 User’s Manual...
  • Page 35 CA. When the signed certificate is returned, install it by uploading the signed certificate. -Provide the Certificate Information To create a Self-signed HTTPS Certificate or a Certificate Request to CA, please enter the information as requested: AirLive SD-2020 User’s Manual...
  • Page 36 Indicate the name of the person or other entity that the certificate identifies (often used to identify the website). - Valid days Enter the period in days (1~9999) to indicate the valid period of certificate. Click on <OK> to save the Certificate Information after complete. AirLive SD-2020 User’s Manual...
  • Page 37 The Filtered IP Addresses list box shows the currently configured IP addresses. Up to 256 IP address entries may be specified. To remove an IP address from the list, please select the IP and then click the <Delete> button. AirLive SD-2020 User’s Manual...
  • Page 38 Enter the user identity associated with the certificate. Up to 16 characters can be used. Private Key Password Enter the password (maximum 16 characters) for user identity. Enable IEEE 802.1X Check the box to enable IEEE 802.1X. Click on <Save> to save the IEEE 802.1X / EAP- TLS setting. AirLive SD-2020 User’s Manual...

  • Page 39: Network

    DeviceSearch.exe, which can be found in “DeviceSearch” folder in the supplied CD. NOTE: Please make the record of the IP Camera’s MAC address, which can be found in the label of the camera, for identification in the future. AirLive SD-2020 User’s Manual...
  • Page 40 Enter the Default Gateway of the camera. The default Default Gateway setting is 192.168.1.254 DNS (Domain Name System) translates domain names into Primary/ IP addresses. Enter the Primary DNS and Secondary DNS Secondary DNS that are provided by ISP. AirLive SD-2020 User’s Manual...
  • Page 41 IPv6 by checking the box and click on <Save> to complete the setting. - DIPS ID It’s a unique number of each device for identification and this ID is used for DIPS. This function now is reserved for future use. AirLive SD-2020 User’s Manual...
  • Page 42 DSCP is disabled. The IP Camera uses the following QoS Classes: Video, Audio and Management. Video DSCP The class consists of applications such as MJPEG over HTTP, RTP/RTSP and RTSP/HTTP. Audio DSCP This setting is only available for the IP Cameras that support audio. AirLive SD-2020 User’s Manual...
  • Page 43 Traps are used by the IP Camera to send massages to a management system for important events or status changes. Enable Traps Check the box to activate trap reporting. Trap address Enter the IP address of the management server. AirLive SD-2020 User’s Manual...
  • Page 44 - UPnP Setting Enable UPnP When the UPnP is enabled, whenever the IP Camera is presented to the LAN, the icon of the connected IP Cameras will appear in My Network Places to allow for direct access. AirLive SD-2020 User’s Manual...

  • Page 45: Ddns

    Host name Enter the registered domain name in the field. Username/E-mail Enter the username or e-mail required by the DDNS provider for authentication. Password/Key Enter the password or key required by the DDNS provider for authentication. AirLive SD-2020 User’s Manual...

  • Page 46: Mail

    Two sets of SMTP can be configured. Each set includes SMTP Server, Account Name, Password and E-mail Address settings. For SMTP server, contact the network service provider for more specific information. AirLive SD-2020 User’s Manual...

  • Page 47: Ftp

    <Alarm> triggered and <Motion Detection> notifications can be sent to the specified HTTP server. Click on <Save> when finished. Please refer to: section Application> Send HTTP notification Motion Detection>Send HTTP notification for HTTP Notification settings. AirLive SD-2020 User’s Manual...

  • Page 48: Application

    Select an alarm type, <Normal close> or <Normal open>, that corresponds with the alarm application. Triggered Action (Multi-option) The Administrator can specify alarm actions that will take at an alarm occurrence. All options are listed as follows: AirLive SD-2020 User’s Manual...
  • Page 49 When the alarm is triggered, event images will be sent to the appointed e-mail address. <Pre-trigger buffer> function allows users to check what happened to cause the trigger. The <Pre-trigger buffer> frame rate could be pre-determined. AirLive SD-2020 User’s Manual...
  • Page 50 Send HTTP notification Check this item, select the destination HTTP address, and specify the parameters for event notifications by <Alarm> triggered. When an alarm is triggered, the notification can be sent to the specified HTTP server. AirLive SD-2020 User’s Manual...
  • Page 51 The file name suffix will end at the number being set. For example, if the setting is up to “10,” the file name will start from 00, end at 10, and then start all over again. AirLive SD-2020 User’s Manual...
  • Page 52 The original image in the FTP site will be overwritten by the new uploaded file with a static filename. - Save After complete all the settings mentions above, please click on the <Save> button to save all the settings on this page. AirLive SD-2020 User’s Manual...

  • Page 53: Motion Detection

    Detection Window. To cancel a Motion Detection Window, move the mouse cursor to the selected Window, and click on the <delete> button. If Motion Detection function is activated, the pop-out window (Motion) with indication of motion will be shown. AirLive SD-2020 User’s Manual...
  • Page 54 Sensitivity level [1-100]: The default level is 80, which means if 20% or more sampling pixels are detected differently, system will detect motion. The bigger the value, the more sensitive it is. AirLive SD-2020 User’s Manual...
  • Page 55 FTP during the trigger active until the event stops. Set the Image frequency as the upload frame rate. The setting range is from 1 frame to 15 frames. NOTE: Make sure FTP configuration has been completed. Refer to section for further details. AirLive SD-2020 User’s Manual...
  • Page 56 <Upload for __ sec> to set the recording duration after motion is triggered. The setting range is from 1 to 99999 seconds. Select <Upload during the trigger active> to record the triggered video until the trigger is off. AirLive SD-2020 User’s Manual...
  • Page 57 The original image in the FTP site will be overwritten by the new uploaded file with a static filename. - Save Please click on the <Save> button to save all the Motion Detection settings mentioned above. AirLive SD-2020 User’s Manual...

  • Page 58: Network Failure Detection

    <On>. Users can also activate the function according to the schedule time that is previously set in the <Schedule> setting page. Select <By schedule> and click <Please select…> to choose the desired schedule from the drop-down menu. AirLive SD-2020 User’s Manual...
  • Page 59 Send Alarm Message by FTP/E-Mail The Administrator can select whether to send an alarm message by FTP and/or E-Mail when an alarm is triggered. - Save Click on the <Save> button to save all the settings mentioned above. AirLive SD-2020 User’s Manual...

  • Page 60: Storage Management

    Then the IP Camera will return to the regular recording mode after events recording. Remove To remove a file, select the file first, and then click on the <Remove> button. AirLive SD-2020 User’s Manual...
  • Page 61 To open / download a video clip, select the file first, and then click on the <download> button below the Recording list field. The selected file window will pop up. Click on the AVI file to directly play the video in the player or download it to a specified location. AirLive SD-2020 User’s Manual...

  • Page 62: Recording

    (hour:minute) and time period (hour:minute) to activate Micro SD / SDHC Card Recording at certain time frames. The setting range for time period hour is from 0 to 168. Please click on <Save> to save the setup. AirLive SD-2020 User’s Manual...

  • Page 63: Schedule

    The setting range for the duration time is from 00:00 to 168:59. Click <Delete> to delete a chosen time frame. Please click on <Save> to save the setup. NOTE: Users MUST select <By schedule> under each feature setting page to enable the schedule function. AirLive SD-2020 User’s Manual...

  • Page 64: File Location

    NOTE: Make sure the selected file path contains valid characters such as letters and numbers. NOTE: For users with Windows 7 operating system, it is required to log on as an Administrator to implement the Snapshot and Web Recording function. AirLive SD-2020 User’s Manual...

  • Page 65: View Information

    Click on the tab to view the system log file. The content of the file provides useful information about connections after system boot-up. 2. User Information The Administrator can view each added user’s login information and privileges (refer to Security section). AirLive SD-2020 User’s Manual...
  • Page 66 Therefore, it denotes the user is granted privileges of I/O access, Camera control and Listen. 3. Parameters Click on this item to view the entire system’s parameter setting such as Camera Settings, Mask Information and Network Information. AirLive SD-2020 User’s Manual...

  • Page 67: Factory Default

    Press the <Partial Restore> button to recall partial default setting. Then the system will restart in 30 seconds. NOTE: The IP address will not be restored to default. - Reboot Click on the <Reboot> button, and the system will restart without changing current settings. AirLive SD-2020 User’s Manual...

  • Page 68: Software Version

    6. System 6.17 Software Version The current software version is displayed in the software version page. AirLive SD-2020 User’s Manual...

  • Page 69: Software Upgrade

    Subsequently, the upgrade status bar will be displayed on the page. When it runs to 100%, the upgrade process is finished. After the upgrade process is finished, the viewer will return to Home page. AirLive SD-2020 User’s Manual...

  • Page 70: Maintenance

    - Upload Files To copy an existing configuration file to the IP Camera, please click on <Browse> to select the configuration file first, and then click on the <Upload> button for uploading. AirLive SD-2020 User’s Manual...

  • Page 71: Streaming

    The following is descriptions for different video rotate type. Flip If select <Flip>, the image will be rotated vertically. Mirror If select <Mirror>, the image will be rotated horizontally. 90 Degree Counter-/clockwise Selecting <90 Degree Counter-/clockwise> will make image 90° counter-/clockwise inversed. AirLive SD-2020 User’s Manual...
  • Page 72 Profile> according to its compression needs. With the same bit rate, the higher the compression ratio, the better the image quality is. The default setting is <Main Profile>. NOTE: Please make sure the higher compression ratio is supported by system before setup. AirLive SD-2020 User’s Manual...

  • Page 73: Video Compression

    The default setting of H.264-1 is 4096 kbit/s and for H.264-2 / H.264-3 / H.264-4 is 1024 kbit/s; the setting range for H.264-1 is from 64 to 8192 kbps and for H.264-2 / H.264-3 / H.264-4 is from 64 to 2048 kbit/s. AirLive SD-2020 User’s Manual...
  • Page 74 The CBR (Constant Bit Rate) mode could be the preferred bit rage mode if the bandwidth available is limited. It is important to take account of image quality while choosing to use CBR mode. Click on <Save> to confirm the setting. AirLive SD-2020 User’s Manual...

  • Page 75: Video Ocx Protocol

    H.264 Video / Audio Port: Specify the transmission port number of the video data from 1124 to 65534. Time to Live: Set the maximum TTL that multicast can pass through. The default value is 15. Click on <Save> to confirm the setting. AirLive SD-2020 User’s Manual...

  • Page 76: Video Frame Rate

    2. H.264 Frame Rate Setting H.264-1/2/3/4 Frame Rate The default setting of H.264-1 / H.264-2 / H.264-3 / H.264-4 Frame Rate is 30 fps; the setting range is from 1 to 30. Click on <Save> to confirm the setting. AirLive SD-2020 User’s Manual...

  • Page 77: Audio

    ALAW signify 64 kbps but in different compression formats. Higher bit rate will let higher audio quality and require bigger bandwidth. - Recording to Storage Select <Enable> from the drop-down menu to enable audio recording with videos into SD card. Click on <Save> to confirm the setting. AirLive SD-2020 User’s Manual...
  • Page 78 7. Streaming AirLive SD-2020 User’s Manual...

  • Page 79: Ptz

    / focus ratio. Subsequently, assign a number for the current position from the drop-down Number List (click on <PrePage> or <NextPage> button to reach number 1 to 256), and enter its descriptive name. Click on the button <Set> to save the settings mentioned above. AirLive SD-2020 User’s Manual...

  • Page 80: Cruise

    <Set> button of <Record End> to quit. Then this Cruise Path will be automatically recorded. - Cruise Run Select the specified Cruise Path from the drop-down list, click on the <Run> button, and then the camera will start touring around as recorded. AirLive SD-2020 User’s Manual...

  • Page 81: Auto Pan

    Start Point of an Auto Pan Path. Click on the <Set> button of the <Start Point> and the current view will be automatically saved as the start point of the Auto Pan Path. NOTE: The room ratio of an Auto Pan’s Start Point will persist throughout the whole path. AirLive SD-2020 User’s Manual...
  • Page 82 “fullscreen”. Then users can view the camera navigation in full screen. To stop running an Auto Pan Path, simply move the cursor to the live view pane and move the camera in any direction. AirLive SD-2020 User’s Manual...

  • Page 83: Sequence

    “fullscreen”. Then users can view the camera navigation in full screen. To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera in any direction. AirLive SD-2020 User’s Manual...

  • Page 84: Home

    Dome Camera will start to count down when it idles, and then execute the predefined action as time expires. The time period ranges from 1 to 128 minutes; please specify it in the field. AirLive SD-2020 User’s Manual...

  • Page 85: Tilt Range

    NOTE: The tilt angle range is between -10° to +100° when the Flip function under Misc 1 setting page is set as <Off> or <M.E.>. NOTE: The tilt angle range is between -10° to +190° when the Flip function under Misc 1 setting page is set as <Image>. AirLive SD-2020 User’s Manual...

  • Page 86: Privacy Mask

    Transparency The Privacy Mask can be set as transparency if necessary. Color Select a desired color from the <Color> drop-down list for the specified Privacy Mask. Click on <Set> to save the Privacy Mask’s color properties. AirLive SD-2020 User’s Manual...
  • Page 87 Users can setup the location of every privacy mask by the control panel on the Privacy Mask page. Set a number from 1 to 30 as the PT Step when users adjust the privacy mask via the control panel. Every step indicates 0.225°. AirLive SD-2020 User’s Manual...

  • Page 88: Camera-Exposure

    The value of iris is adjustable from F1.6 to F28. - Manual Mode In this mode, users can change the Shutter speed (1/10000 to 1/30), Iris (F1.6 to F28), and Gain (1 to 15) manually. AirLive SD-2020 User’s Manual...

  • Page 89: Camera-Wb

    The following table shows the color temperature of some light sources for reference. Light Sources Color Temperature in K Cloudy Sky 6,000 to 8,000 Noon Sun and Clear Sky 6,500 Household Lighting 2,500 to 3,000 75-watt Bulb 2,820 Candle Flame 1,200 to 1,500 AirLive SD-2020 User’s Manual...
  • Page 90 The Dome Camera takes out the signals in a screen in the range from 2500K to 10000K. Manual Mode In this mode, users can change the White Balance value manually via specifying R gain and B gain; the range of R/B gain is from 0 to 255. AirLive SD-2020 User’s Manual...

  • Page 91: Camera-Misc1

    180°, and then continue tilting to keep tracking objects. Image Mode IMAGE represents digital IMAGE FLIP, which enables users to keep tracking objects seamlessly; under the mode, almost no delay occurs in comparing with that under the M.E. mode. AirLive SD-2020 User’s Manual...
  • Page 92 In the Auto mode, the internal circuit will automatically decide the occasion to remove the IR cut filter according to the image brightness level. Select the item to enable the IR cut filter. Night Select the item to disable IR cut filter. AirLive SD-2020 User’s Manual...

  • Page 93: Camera-Misc2

    With the 2D Noise Reduction function, the processor analyzes pixel by pixel and frame by frame to eliminate environmental noise signal so that the highest quality image can be produced even in low light conditions. Click on <Set> button to save the setting. AirLive SD-2020 User’s Manual...
  • Page 94 Dome Camera would start to pan (0 degree). - TV System Select the video format that matches the present TV system. Click on <Set> button to save the setting. It contains 1080P 30fps (NTSC), 1080P 25fps (PAL), 720P 60fps (NTSC), 720 50fps (PAL). AirLive SD-2020 User’s Manual...

  • Page 95: Camera-Default

    8. PTZ 8.12 Camera-Default In the Camera Default page, users can set the camera back to factory default settings simply by clicking on the <Set Default> button. AirLive SD-2020 User’s Manual...

  • Page 96: Appendix

    352 x 240 (30 fps) 720 x 480 (30 fps) 352 x 240 (30 fps) 1024 x 768 (30 fps) 640 x 480 (30 fps) 352 x 240 (30 fps) 352 x 240 (30 fps) 352 x 240 (30 fps) AirLive SD-2020 User’s Manual...
  • Page 97 1024 x 768 (30 fps) 720 x 480 (30 fps) 800 x 600 (30 fps) 640 x 480 (30 fps) 352 x 240 (30 fps) 720 x 480 (30 fps) 720 x 480 (30 fps) 640 x 480 (30 fps) AirLive SD-2020 User’s Manual...
  • Page 98 352 x 240 (60 fps) 800 x 600 (30 fps) 720 x 480 (30 fps) 800 x 600 (30 fps) 640 x 480 (30 fps) 352 x 240 (60 fps) 720 x 480 (30 fps) 720 x 480 (30 fps) AirLive SD-2020 User’s Manual...
  • Page 99 352 x 240 (60 fps) 720 x 480 (60 fps) 800 x 600 (30 fps) 720 x 480 (60 fps) 640 x 480 (60 fps) 640 x 480 (60 fps) 640 x 480 (60 fps) 800 x 600 (60 fps) AirLive SD-2020 User’s Manual...
  • Page 100 1280 x 720 (15 fps) 800 x 600 (30 fps) 720 x 480 (30 fps) 1280 x 720 (30 fps) 640 x 480 (30 fps) 352 x 240 (30 fps) 1024 x 768 (30 fps) 800 x 600 (30 fps) AirLive SD-2020 User’s Manual...
  • Page 101 800 x 600 (30 fps) 720 x 480 (30 fps) 1024 x 768 (30 fps) 640 x 480 (30 fps) 352 x 240 (30 fps) 800 x 600 (30 fps) 800 x 600 (60 fps) 720 x 480 (60 fps) AirLive SD-2020 User’s Manual...
  • Page 102 640 x 480 (60 fps) 640 x 480 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) AirLive SD-2020 User’s Manual...
  • Page 103 720 x 480 (60 fps) 640 x 480 (60 fps) 352 x 240 (60 fps) 640 x 480 (60 fps) 640 x 480 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) 352 x 240 (60 fps) AirLive SD-2020 User’s Manual...
  • Page 104 1920 x 1080 (30 fps) 1280 x 1024 (30 fps) 1280 x 720 (30 fps) 1024 x 768 (30 fps) 800 x 600 (60 fps) 720 x 480 (60 fps) 640 x 480 (60 fps) 352 x 240 (60 fps) AirLive SD-2020 User’s Manual...

  • Page 105: Smart Tracking (Optional)

    NOTE: Setting items will be available after <On> is selected B.1.1 Max Limited Setting This setting menu allows the users to define a tracking area for the detection and tracking movement of the camera. Turn Off AirLive SD-2020 User’s Manual...
  • Page 106 Please click and drag the PTZ pointer in the view window to the desired left or right pan position. Then click on the <Get L Pan> / <Get R Pan> button to get the boundary values. Save Click on <Save> to confirm the settings. AirLive SD-2020 User’s Manual...
  • Page 107 Detection range can be set to detect motions around the centre of the view window. Please choose a value to define the detection area (in percentage) around the centre point. The available options are <L(60%)>, <M(50%)> and <S(40%)>. Save Click on <Save> to confirm the settings. AirLive SD-2020 User’s Manual...
  • Page 108 Please type in the time that the camera should keep watching a stopped tracking object. The camera will return to the home position after the defined time period. Click on <Go> to move the camera to the home position. Save Click on <Save> to confirm the settings. AirLive SD-2020 User’s Manual...
  • Page 109 Click on <Set> to confirm the position. Time Please type in the duration of time that the camera should track a moving object. Click on <Go> to move the camera to the guard position. Save Click on <Save> to confirm the settings. AirLive SD-2020 User’s Manual...
  • Page 110 However, if it is not, please contact the system installers or the sales representatives for the product key. Authentication can be done by type in the product key in the blank space provided in the Inset Key page and click <OK> to enable the function. AirLive SD-2020 User’s Manual...
  • Page 111 9. Appendix AirLive SD-2020 User’s Manual...

Table of Contents