I Alarm Status Table; I Video Loss Status Table - Panasonic WJ-MPU955A Operating Instructions Manual

I Alarm Status Table

The table shows the alarm statuses.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display "AlmStat" menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
AlmStat:
On
3. Select a desired function by pressing one of the F1 to
F3 buttons.
Available buttons and functions
F1: On
Opens the ALARM STATUS table.
F2: Off
Closes the ALARM STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.
ALARM STATUS
ALM STATE
1 DISARMED
1 ARMED
1 ACTIVE
1 ACKED
1 CLEARED
1 RESET
NAME: Alarm text
(Refer to p. 66 for other columns on the table.)
4. To display the next page, press the + button.
To display the previous page, press the – button.
Notes:
• To display the first page of table, press the + but-
ton while holding down the SHIFT button.
• To display the last page of table, press the – button
while holding down the SHIFT button.
5. To exit the ALARM STATUS table, perform one of the
following.
• Select a camera. (Refer to p. 56 Camera Selection.)
• Press F2, then press the MON(ESC) button.
• Press F2, then press the EXIT button.
80
008
Off Blk
PG
NAME
FRONT DOOR
BACK DOOR
–
–
–
–

I Video Loss Status Table

The table shows the video loss detection statuses.
1. Select a desired monitor. (Refer to p. 56 Monitor
Selection.)
2. Display "VL Stat" menu. (Refer to Step 1 and 2 of p. 77
To Recall Menu Functions.)
VL Stat:
On Off
3. Select a desired function by pressing one of the F1 to
F3 buttons.
Available buttons and functions
F1: On
Opens the VIDEO LOSS STATUS table.
F2: Off
Closes the VIDEO LOSS STATUS table.
F3: Blk
Changes the monitor background beween camera
images and black picture.
VIDEO LOSS STATUS
CAM PORT NODE
6400 999 SX
6400 999 SX
6400 999 SX
6400 999 SX
CAM: Logical camera number
PORT#: Video input port number
NODE: Video switch node type
STATUS:
ABV/IN: Video level is above normal and in sync.
BLW/IN: Video level is below normal and in sync.
ABV/OUT: Video level is above normal and out of
sync.
BLW/OUT: Video level is below normal and out of
sync.
LOCATION: Logical cage number that the port
belongs to.
4. To display the next page, press the + button.
To display the previous page, press the – button.
Notes:
• To display the first page of table, press the + but-
ton while holding down the SHIFT button.
• To display the last page of table, press the – button
while holding down the SHIFT button.
5. To exit the VIDEO LOSS table, perform either of the fol-
lowing.
• Select a camera. (Refer to p. 56 Camera Selection.)
• Press F2, then press the MON(ESC) button.
• Press F2, then press the EXIT button.
009
Blk
PG
STATUS LOCATION
ABV/IN 1234567890
ABV/OUT 1234567890
BLW/IN 1234567890
BLW/OUT 1234567890