Table of Contents
Advertisement
System Controller-Related Problems
Symptom
WV-CU950 controller fails to
start. LCD shows: "Connecting
to Main CPU..."
Encoder and Decoder-Related problems (NTSC model only)
Symptom
The encoder or decoder does
not start up normally.
The digital disk recorder has an
communication error.
You cannot select the digital
disk recorder.
Possible cause / Possible solution
Check the network connection between the CPU and CU950
controller. Check the controller database and make sure it
has the correct controller Ethernet address.
Possible cause / Possible solution
Check whether the rotary switch setting matches the
encoder or decoder database setting.
Be sure that encoder or decoder is in the main CPU mode.
Check the connection between the digital disk recorder and
CPU.
Check if the IP address setting in the admin console match-
es that in SETUP MENU of digital disk recorder.
Check the settings related to the digital disk recorder in the
admin console.
Reference
Admin Console
User's Guide
Reference
Operating
Instructions of
MPEG2
Encoder/MPEG2
Decoder
Operating
Instructions of
Digital Disk
Recorder
Admin Console
User's Guide
85
Advertisement
Table of Contents
