Prepare For Self-Clean And Delayed Self-Clean Cycle; Self-Cleaning - Amana AGDS902 Series Owner's Manual

Prepare for Self-clean and
Delayed Self-clean Cycle
To avoid risk of personal injury, do not touch oven
vents or areas around vents during self-cleaning.
These areas can become hot enough to cause burns.
To avoid risk of smoke damage or fire, clean excess
spills from oven interior.
• The self-clean cycle uses above normal cooking
temperatures to automatically clean the entire oven
interior.
• It is normal for flare-ups, smoking or flaming to occur
during cleaning if the oven is heavily soiled. It is better
to clean the oven regularly than to wait until there is a
heavy build-up of soil in the oven.
• During the cleaning process, the kitchen should be well
ventilated to help eliminate normal odors associated
with cleaning.
• Wipe up excess grease or spillovers from the oven
bottom to prevent excessive smoking, flare-ups or
flaming during the clean cycle.
• Move birds and small animals susceptible to fumes or
smoke to another room.
• Do not use cleaning cycle if oven light cover is not
properly in place.
• Remove oven racks and all cooking utensils from oven.
• Remove items from range top and backguard. These
areas can become hot during self-cleaning cycle.

Self-cleaning

Self-clean feature uses high oven temperature to clean
oven interior.
1. Prepare oven for self-cleaning.
2. Move Self-clean latch lever to right side to lock door.
3. Press CLEAN pad.
• Oven begins to clean automatically and lasts for
approximately 3 hours.
4. After cycle ends oven has cooled to a safe
temperature, door latch can be opened.
Delayed Self-clean Cycle
1. Prepare oven for self-cleaning.
2. Move Self-clean latch lever to right side to lock door.
3. Press CLEAN pad.
4. Press STOP TIME pad.
5. Turn TIME/TEMP SET knob until desired stopping
time appears in display.
• Oven begins to clean automatically and lasts for
approximately 3 hours.
• Starting time is automatically calculated back based
on amount of cleaning time and stop time.
6. After cycle ends and oven has cooled to a safe
temperature, door latch can be opened.
Interrupt Self-clean Cycle
1. Press OVEN CANCEL pad.
2. After oven has cooled to a safe temperature, door
latch can be opened.
26