Table of Contents
Advertisement
Quick Links
30" (76.2 CM) FREESTANDING GAS RANGES
IMPORTANT:
Save for local inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
W10821262A
INSTALLATION INSTRUCTIONS
Table of Contents
RANGE SAFETY ....................................................................... 2
INSTALLATION REQUIREMENTS .......................................... 3
Tools and Parts .................................................................... 3
Location Requirements ....................................................... 4
Electrical Requirements ....................................................... 5
Gas Supply Requirements ................................................... 6
INSTALLATION INSTRUCTIONS ........................................... 7
Unpack Range ..................................................................... 7
Install Anti-Tip Bracket ......................................................... 7
Make Gas Connection .......................................................... 8
Verify Anti-Tip Bracket Is Installed and Engaged ................ 9
Level Range ....................................................................... 10
Electronic Ignition System ................................................. 10
Complete Installation ......................................................... 11
GAS CONVERSIONS ............................................................ 12
LP Gas Conversion ............................................................ 12
Complete Conversion ........................................................ 14
Natural Gas Conversion .................................................... 14
Complete Conversion ........................................................ 16
Advertisement
Table of Contents
Related Manuals for Amana AGR4230BAW
Summary of Contents for Amana AGR4230BAW
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS 30" (76.2 CM) FREESTANDING GAS RANGES Table of Contents RANGE SAFETY ............... 2 INSTALLATION REQUIREMENTS .......... 3 Tools and Parts ..............3 Location Requirements ............4 Electrical Requirements ............5 Gas Supply Requirements ........... 6 INSTALLATION INSTRUCTIONS ........... 7 Unpack Range .............. -
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... -
Page 3: Installation Requirements
In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet. -
Page 4: Location Requirements
Location Requirements Mobile Home - Additional Installation Requirements IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air. The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, It is the installer’s responsibility to comply with installation ■... -
Page 5: Electrical Requirements
Cabinet Dimensions Electrical Requirements Cabinet opening dimensions shown are for 25" (64.0 cm) WARNING countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. If the cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by ½"... -
Page 6: Gas Supply Requirements
Gas Supply Requirements WARNING Gas Supply Line Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the ■ range location. A smaller size pipe on longer runs may result in insufficient gas supply. With LP gas, piping or tubing size can be ½"... -
Page 7: Installation Instructions
Burner Input Requirements Gas Supply Pressure Testing Input ratings shown on the model/serial rating plate are for Gas supply pressure for testing regulator must be at least 1" elevations up to 2,000 ft (609.6 m). water column pressure above the manifold pressure shown on the model/serial rating plate. -
Page 8: Make Gas Connection
3. Determine and mark centerline of the cutout space. The Make Gas Connection mounting can be installed on either the left side or right side of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 9 ⁄... -
Page 9: Verify Anti-Tip Bracket Is Installed And Engaged
Complete Connection WARNING 1. Locate gas pressure regulator in the back of the range. Electrical Shock Hazard Plug into a grounded 3 prong outlet. A. Gas pressure regulator Do not remove ground prong. IMPORTANT: Do not remove the gas pressure regulator. Do not use an adapter. -
Page 10: Level Range
IMPORTANT: If the back of the range is more than 2" (5.1 cm) Check Operation of Cooktop Burners from the mounting wall, the rear range foot may not engage the bracket. Slide the range forward and determine if there 1. If control panel and knobs were removed earlier, reinstall is an obstruction between the range and the mounting wall. -
Page 11: Complete Installation
4. Adjust the air shutter. Check Operation of Oven/Broil Burner 5. Turn the oven back on and check for proper flame. If the flame is still not properly adjusted, turn the oven off, wait for Electronic oven control (on some models): the oven burner to cool down, and repeat Step 4 until flame 1. -
Page 12: Gas Conversions
GAS CONVERSIONS Gas conversions from Natural gas to LP gas or from LP gas to LP Gas Conversion Natural gas must be done by a qualified installer. WARNING WARNING Explosion Hazard Use a new CSA International approved gas supply line. Tip Over Hazard Install a shut-off valve. - Page 13 2. Remove the cap from the gas pressure regulator using a 4. Install LP gas orifice spuds using a 7 mm combination flat-blade screwdriver. wrench. NOTE: Be sure sealing washer remains in the same position. A. Cap 3. To convert to LP gas, unscrew the plastic adjustment screw A.
-
Page 14: Complete Conversion
3. Locate LP gas orifice spud stamped “56” in the bag Natural Gas Conversion containing literature supplied with the range. 4. Use a ³⁄ " combination wrench to remove the Natural gas WARNING orifice spud. 5. Install the number “56” LP gas spud. IMPORTANT: Do not overtighten. - Page 15 2. Remove the cap from the gas pressure regulator using 2. Locate Natural gas orifice spuds for top burners in the bag a flat-blade screwdriver. containing literature included with the range. Three Natural gas spuds are stamped “149,” and one is stamped “110 NOTE: Make sure sealing washer remains in the same (Red/Brass).”...
-
Page 16: Complete Conversion
To Convert Oven Burner Complete Conversion 1. Open the oven door and remove oven racks and oven tray 1. Refer to the “Make Gas Connection” section for properly with flame spreader, and set aside. connecting the range to the gas supply. 2.