Safety Instructions For Installation - Miele ESW 6114 Operating And Installation Instructions

Safety instructions for installation

38
~
Before connecting the appliance to the mains electricity
supply make sure that the connection data on the data plate
(voltage and frequency) correspond with the mains electricity
supply.
This data must correspond in order to avoid the risk of
damage to the appliance. Consult a qualified electrician if in
any doubt.
~
The socket and On/Off switch should be easily accessible
after the appliance has been built in.
~
The food warming drawer may only be built in in
combination with those appliances quoted by Miele as being
suitable. Miele cannot guarantee trouble-free operation if the
appliance is operated in combination with appliances other
than those quoted by Miele as being suitable.
~
When building in the food warming drawer in combination
with another suitable appliance, the food warming drawer
must be fitted above a fixed interim shelf in the housing unit
which can support the weight of both the food warming
drawer and that of the other appliance.
~
As the combination appliance is placed directly on top of
the food warming drawer once it is built in, an interim shelf is
not necessary between the two appliances.
~
The appliance must be built in so that
- the contents of the drawer can be seen. This is to avoid
scalding from hot food spilling over.
- there is enough space for the drawer to be pulled out fully.
~
The food warming drawer is available in two models which
differ in height. The building-in dimensions for the food
warming drawer must be added to the building-in dimensions
for the combination appliance to establish the niche size
required.
When building in the combination appliance, it is essential
to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
All dimensions in this instruction booklet are given in mm.