Miele ESW 700-25 Operating Instructions Manual

Built-in warming drawer
Hide thumbs


Operating Instructions

Built-in Warming Drawer
ESW 760-25
ESW 761-25
To prevent accidents
and machine damages,
read these instructions
Installation or use.
05 857 820



  Also See for Miele ESW 700-25

  Related Manuals for Miele ESW 700-25

  Summary of Contents for Miele ESW 700-25

  • Page 1: Operating Instructions

    Operating Instructions Built-in Warming Drawer ESW 700-25 ESW 760-25 ESW 761-25 To prevent accidents and machine damages, read these instructions installation or use. M.-Nr. 05 857 820...
  • Page 2: Integrated Installations

    Contents ..........8 Timer .
  • Page 3 Installation, repair and mainten- ance work should be by a Miele authorized service technician. Work by unqualified persons could be danger- ous and may void the warranty.
  • Page 4 However, under certain circumstances it may be possible for an installation in these applications. Please contact the near- est Miele Dealer or Technical Service with specific requirements. Prevent burns. Do not touch hot surfaces. Use handles or knobs.
  • Page 5 To prevent injuries, do not use accessories not recommended by Miele. Before cleaning the appliance, trip the circuit breaker and allow the appliance to cool. Do not use a steam cleaner to clean the drawer.
  • Page 6 Children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. : Do not store items of interest to children in cabinets above or in the warming drawer.
  • Page 7 a Timer b Temperature selector c Humidity control d Non-slip mat e Rack f Drawer...
  • Page 8 The warming drawer is operated by the timer, the temperature selector and the humidity control. The controls are only visible when the drawer is open. Once the warming drawer begins to heat the circulation fan will turn on to evenly heat the drawer. When the selected temperature is reached, the heat and the fan will shut off to prevent food from drying out.
  • Page 9 The temperature can be set on or between the "Low", "Medium" and "High" settings. The temperature settings: – Low: 140 °F (60 °C) – Medium: 176 °F (80 °C) – High: 203 °F (95 °C)
  • Page 10 The humidity control adjusts the humid- ity within the drawer. The humidity control can be set anywhere between "Moist" and "Dry". Use oven mitts when adjusting the humidity control. The control may become hot during use. – "Moist": This position closes the vents and seals the moisture in the drawer to keep food moist and soft.
  • Page 11 Bacon Beef Medium / Well Beef Rare Bread hard roles Bread soft rolls Bread proofing Casserole, crisp top Casserole, moist Eggs Fish / Seafood Fish sticks Fried foods Fruit Gravy, cream sauces Lamb Oatmeal Pancakes Pies - Single Crust Pies - Double Crust Pizza Pork Potatoes - baked...
  • Page 12 The drawer load will depend on the type and size of your dishes. The maximum load is 33 lbs (15 kg). Do not rest heavy items on the drawer. Use the supplied rack to increase the load space. The rack can be inserted in three positions: middle, left or right.
  • Page 13 – To keep different foods hot, set the temperature for the food requiring the highest temperature setting. Place the food needing the highest setting on the rack and the other food on the floor of the drawer. – For large quantities of food, it may be necessary to use a higher temp- erature and humidity level.
  • Page 14 For best results, preheat the warming drawer before warming food. ^ Open the drawer. ^ Turn the timer to the desired time setting. ^ Turn the temperature selector to the desired temperature setting. ^ Slide the humidity control to the desired humidity level.
  • Page 15 The warming drawer can also be used to warm dishes. Do not preheat the drawer before warming dishes. Only use heat resistant dishes. ^ Open the drawer. ^ Place the dishes in the drawer. Arrange dishes evenly in the drawer and on the rack.
  • Page 16 , CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "trip- ping" the circuit breaker. Do not clean or remove the warming drawer until it has cooled. Danger of burns! ^ All external surfaces and controls can be cleaned with warm water and liquid dish soap applied with a...
  • Page 17 The drawer can be removed for easier cleaning. ^ Pull the drawer completely out and loosen the nuts. Be careful when removing the heavy drawer. ^ Remove the non-slip mat. ^ Clean all surfaces of the drawer and the non-slip mat with a solution of warm water and liquid dish soap.
  • Page 18 ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause an injury or machine damage. Some minor problems can be fixed without a service call. There is no power to the warming drawer.
  • Page 19 In the event of a fault which you cannot easily fix yourself, please contact: – Your Miele Dealer – The Miele Technical Service Department USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca When contacting Technical Service please quote the serial number and model of the cooktop.
  • Page 21 Installation instructions...
  • Page 22 Contents Disposal of the packing materials ........23 Disposal of an old appliance .
  • Page 23 The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Old appliances may contain materials that can be recycled.
  • Page 24 CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "trip- ping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
  • Page 25 – The warming drawer should be placed at a convenient height for easy access. – The drawer should be installed clear of drafts caused by open doors and windows. – Proper clearance must be allowed for the warming drawer to open with out interference.
  • Page 26 ESW 700-25: ESW 760-25, 761-25:...
  • Page 27 ^ Remove the drawer from the casing before installing the appliance in the cabinetry. ^ Pull the drawer completely out and loosen the nuts. ^ Carefully lift the drawer and pull it slowly out. Set the drawer down on a flat, stable surface.
  • Page 28 Custom made front panels can be installed with models 700-25 FB and 760-25 FB. Width 27 " (695 mm) Height 11" (279 mm) Width 29 " (757mm) Height 11" (279 mm) The custom panel must be atleast (10 mm) thick and made of heat resist- ant material140 °F (60 °C).
  • Page 29 f Press the custom panel tight on to the removed panel. g Screw the removed panel to the custom panel with the eight screws. h Hook the panels into the bottom on and secure at the top with two screws making sure the seal is seated correctly.
  • Page 32 Alteration rights reserved / 4502 M.-Nr. 05 857 820 / V This paper has been bleached without chlorine.

This manual is also suitable for:

Esw 760-25Esw 761-25