Safety Instructions For Installation - Miele ESW 6114 Operating And Installation Instructions

Safety instructions for installation

38
All manuals and user guides at all-guides.com
~
Before connecting the appliance, make sure that the
connection data on the data plate (voltage and rated load)
match the mains electricity supply.
This data must correspond in order to avoid the risk of
damage to the appliance. Consult a qualified electrician if in
any doubt.
~
The socket and on-off switch should be easily accessible
after the appliance has been built in.
~
The warming drawer must only be installed in combination
with Miele appliances. If the warming drawer is used in
combination with other appliances, the warranty will be
invalidated as correct operation cannot be guaranteed.
~
When building in the warming drawer in combination with
another suitable Miele appliance, the warming drawer must
be fitted above a fixed interim shelf in the housing unit to
ensure that the housing unit can support both its weight and
that of the other appliance.
~
As the combination appliance is placed directly on top of
the warming drawer once it is built in, an interim shelf is not
necessary between the two appliances.
~
The appliance must be built in so that:
- the contents of the drawer are visible when opened.
This ensures that scalding from hot food spilling over
does not occur.
- there is enough space for the drawer to be pulled out
fully.
~
The Gourmet warming drawer is available in two models
which differ in height. The niche size required is determined
by the aggregrate dimensions of both the warming drawer
and the combination appliance.
When building in the combination appliance, it is essential
to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
All dimensions in this instruction booklet are given in mm.