Safety Instructions For Installation - Miele EGW 6210 Operating And Installation Instructions

Plate warming drawer
Hide thumbs Also See for EGW 6210:
Table of Contents

Advertisement

Safety instructions for installation

~
Before connecting the appliance to the mains electricity
supply make sure that the connection data on the data plate
(voltage and frequency) correspond with the mains electricity
supply.
This data must correspond in order to avoid the risk of
damage to the appliance. Consult a qualified electrician if in
any doubt.
~
The socket and on-off switch should be easily accessible
after the appliance has been built in.
~
The plate warming drawer may only be built in in
combination with those appliances quoted by Miele as being
suitable. Miele cannot guarantee trouble-free operation if the
appliance is operated in combination with appliances other
than those quoted by Miele as being suitable.
~
When building in the plate warming drawer in combination
with another suitable appliance, the plate warming drawer
must be fitted above a fixed interim shelf in the housing unit
which can support both the weight of the plate warming
drawer and that of the other appliance.
~
As the combination appliance is placed directly on top of
the plate warming drawer once it is built in, an interim shelf is
not necessary between the two appliances.
When building in the combination appliance, it is essential
to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
All dimensions in this instruction booklet are given in mm.
21

Advertisement

Table of Contents
loading

Table of Contents