Kenwood KDGMPV7019 Instruction Manual
Kenwood KDGMPV7019 Instruction Manual

Kenwood KDGMPV7019 Instruction Manual

Cd-receiver

Advertisement

KENWOOD
KDGMPV7019
KDC-MPVGI 9
KDC-X459
KDC-4019
KDC-419
KDC-319
CD-RECEIVER
INSTRUCTION
MANUAL
AMPLI-TUNER
LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
KENWOOD CORPORATION
SIRIUS
Take the time to read through this instruction
manual.
Familiarity
with installation
and operation
procedures will help you
obtain the best performance
from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer to
the model and serial numbers whenever you call upon your KENWOOD
dealer for information or service on the product.
Model KDC-MPV7019/MPV619/X459/4019/419/319
Serial number
0 B64-2243-00 (K)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KDGMPV7019

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
  • Page 2: Table Of Contents

    Basic Operations of remote..2 CD/NIP3/External disc control ........3 Warning features .
  • Page 3: Warning

    TOKYO, JAPAN harmful interference to radio or television reception, which can be determined by turning KENWOOD CORP. CERTIFIES THIS EQUIPMENT the equipment off and on, the user is CONFORMS TO DHHS REGULATIONS NO.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
  • Page 4 IS a piece of precision Note that none of the KDC-CIOO, KDC-C302, any metallic objects (such as coins or metal equipment. C205, C705, and non-Kenwood CD changers tools) inside the unit. When replacing a fuse, only use a new one can be connected.
  • Page 5 If the unit still fails to operate properly after consult your Kenwood dealer. the Reset button has been pressed, contact your local KENWOOD dealer for assistance. Cleaning the Faceplate Terminals Press the reset button if the disc auto If the terminals on the unit or faceplate get changer fails to operate correctly.
  • Page 6: Notes On Playing Mp3

    Notes on playing MP3 Entering ID3 tag This unit can play MPS(MPEG1, 2, 2.5 Audio Layer 3). Note, The Displayable ID3 tag is ID3 however, that the MP3 recording media and formats acceptable version 1 .x. are limited. When writing MP3, pay attention to the following For the character code, refer to the...
  • Page 7 MP3 playing order When a Track Search is executed with file PO being played . . . When selected for play, Album Search, Track Search, or for Album Operation of the button Current Select, files and folders are accessed in the order in which they were file number Button Button...
  • Page 8: Cds

    CD cleaning Handling Clean from the center of the disc and move Don’t touch the recording surface of the CD. outward. Removing When removing CDs from thus unit pull them CD-R and CD-RW are easier to damage than out horizontally. a normal music CD.
  • Page 9 Release button Turning ON the Power Press the [SRCI button. When the power IS ON, the <Security Code> (page 22) IS dlsplayed as “CODE ON” or “CODE OFF”. Turning OFF the Power Press the ISRCI button for at least 1 second. ATT/ DISP I LOUD NF...
  • Page 10 Press the [Ql button. Each time the button is pressed the sound setting switches. Display Increasing Volume Sound setting Press the [A] button. “Flat”/ “FLAT” Flat “User”/ “USER” Decreasing Volume User memory “Rock”/ “ROCK” Press the [VI button. Rock “Pops”/ “POPS” Pops “Easy”/ “EASY”...
  • Page 11 Adjustment Item Display Range Bass Center Frequency “Bas F” 60/70/80/l 00 or 150 Hz Fine-tuning so that the System Q value is optimal when setting (KDC-X459 only) the speaker type. Bass level “Bas”/“BAS” -8 - Bass Q Factor “BasQ” 1.00/l .25/l .50/2.00 Enter Standby (KDCX459 only) Press the [SRCI button.
  • Page 12: General Features

    “DNPS” Disc name DISC Naming can’t be done during CD text or clock display “D-TITLE” Disc title (In External disc source or KDGMPV7019/MPV619 internal CD source) 2 Enter name set mode “T-TITLE” Track title (In External disc source or Press the [NAME] button for at least 2 seconds.
  • Page 13 5 Select the characters 2 Enter Auxiliary input display setting mode Press the [FM] or [AM] button. Press the [DISPI button for at least 2 seconds. selected AUX Name is blinks. presently Characters can be entered by wng a remote with a number buttons.
  • Page 14 The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front and remove it.
  • Page 15 Entering the frequency and tuning. Choose the tuning mode. Press the [AUTOI button. Select the band Each time the button is pressed the Tuning mode switches as Press the [FM1 or [AMI button. shown below 2 Enter Direct Access Tuning mode Operation Tuning mode Display...
  • Page 16 Release button Putting stations with good reception in the memory automatically. Select the band for Auto Memory Entry Press the IFMI or [AMI button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put In the memory Auto Memory Entry closes.
  • Page 17 When there is no disc inserted Drop open the faceplate Press the Release button. 2 insert a disc. 3 Press the faceplate on the right side, and return it to its former position. When the faceplate has been dropped open, It might interfere 3 Press the faceplate on the right side, and return it to its with the shift lever or somethlng else If this happens, pay former position.
  • Page 18: Cd/Nip3/External Disc Control Features

    CD/MP3/External disc control features Selecting the song you want to hear. Playing discs set in the optional accessory disc player connected Searching for a song on the disc or in the MP3 folder. to this unit. Press the [144 or [FM] button. Press the [SRCl button.
  • Page 19 2 Do Album Search Press the [DISC+] or [DISC-l button. Play all the songs on the disc or MP3 folder in random order. Canceling Direct Album Search Press the [RDMI button. Press the [HI] button. Each time the button is pressed Random Play turns ON or OFF. When it’s ON, “RDM ON”...
  • Page 20 Scrollfng the displayed CD text, MP3 text, or MD title. Quickly selecting the folder you want to listen to. Press the [DISP] button for at least 1 second. Enter Album Select mode Press the [#51 button. During Select mode the folder information is displayed as shown below.
  • Page 21 Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENUI button for at least 1 second. “MENU”...
  • Page 22 Press the Reset button and when it’s removed from battery power source Because authorization by the Security Code is required when it’s Turn the power ON. removed from the vehicle, personalizing this unit is by using the 2 Do the step 4 through 7 operation, and enter the Security Security Code is a help in preventing...
  • Page 23 Circle Display is play time. “DSI OFF” LED OFF. “DisplayB” Circle Display IS clock. “DisplayC” Silent display type. Function of the KDGMPV7019/KDGMPV619 Display Setting The illumination color is green. “KEY GRN” “KEY RED” The illumination color is red. Function of the KDC-4019/KDC-319 Setting the graphic part display ON/OFF.
  • Page 24 The set color memory Function of the KDC-MPV7019/KDC-MPV61! Press the [#5] button for at least 2 seconds. When the setting in the memory is called up press the [#51 You can set the display to a desired color. button. The blue fine adjustment setting cannot be stored rn memory. Select Illumination Color Setting Mode...
  • Page 25 Setting the displayed text scroll. Display Setting center frequency, Bass Q factor, Bass extend, Middle center “SCL AUTO” Repeats scroll. frequency, Middle Q factor, and Treble center frequency) “SCL MANU” Scrolls when the display changes. Audio control. The text scrolled IS shown below Setting Display CD text...
  • Page 26: Basic Operations Of Remote

    Basic Operations of remote Use one lithium battery (CR2025). Insert the batteries with the + and - poles aligned properly, following the illustration inside the case. FM/AM/DISCt/DISC- Store unused batteries out of the reach of children. Contact a doctor immediately If the battery is accidentally swallowed. Do not set the remote on hot places such as above the dashboard II’...
  • Page 27 [WI/ buttons [FM]/ [AM] buttons Doing track forward and backward. Select the band. Each time the [FM] button is pressed it switches between the [DISC+I/ [DISC-l buttons FMI, FM2, and FM3 bands. Doing album forward and backward. [~rrl/ [)H] buttons [HI] button Tune up or down band.
  • Page 28: Installation Procedure

    External view External view ..Number of items ..Number of items If you connect the Ignition wrre (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.
  • Page 29 Rear right output (Red) Rear left output (WhIteI Non-fading right output (Red) (KDC-MPV7019/X459/4019 only) Non-fadrng left output (Whrte) (KDC-MPV7019/X459/4019 only1 To KENWOOD disc changer/ Front right output (Red) DAB control rnput/KPA-SDlOO/ KPA-HDlOO/KPA-SSIOO Front left output (White) To connect these leads, refer to the relevant Instruction manuals.
  • Page 30: Installation

    W Installing in Japanese-Made Cars W Installation the hard rubber frame” (page 31) Refer to the section “Removing Firewall or metal support and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the Screw (M4X8) vehicle and secure the unit with the accessory...
  • Page 31 W Removing the hard rubber frame Removing the Unit Refer to the section “Removing the hard rubber frame” and then Engage the catch pins on the removal tool and remove the two remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure.
  • Page 32: Troubleshooting Guide

    Troubleshooting Guide What might seem to be a malfunction in your unit may ? The Bass center frequency, Bass quality factor, Bass extend, Middle center frequency, Middle quality factor, and Treble center frequency just be the result of slight misoperation or miswiring.
  • Page 33 Tuner source ? Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. ? Radio reception is poor. The settrng is not canceled. The car antenna is not extended. w The settings for these functions remarn on until the setting to off Pull the antenna out all the way.
  • Page 34 Troubleshooting Guide MP3 source ? Can’t enter Album Select mode. There’s no folder recorded in the MP3 medra ? Cannot play an MP3. Use a media wrth levels. Not conforming to IS0 9660 Level l/2, Joliet, and Romeo. ? The songs in the selected folder aren’t played in Album Select Use a [medium conforming to IS0 9660 Level l/Z, Joliet.
  • Page 35 MECHA ER: Something is wrong with the disc magazine. Or the The messages shown below display your systems condition. unit is malfunctioning for some reason. o Check the disc magazine. And then press the reset EJECT: No disc magazine has been loaded in the changer, button on the unit.
  • Page 36: Specifications

    Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (200 kHz space)... .87.9 MHz - 107.9 MHz Maximum output power..........50 W x 4 Usable sensitivity (S/N = 30dB) ....9.3dBf (0.8 uV/75 Q) Full Bandwidth Power (at less than 1 % THD) ....
  • Page 37 & osoite Ovopa Km Sreti0uvaq ayopao?$ Thank you for purchasing this kenwood product. As mentioned in the pages of this Nome e indirizzo del cliente booklet, our warranty is only valid in the countries listed. If your country is...
  • Page 38 SERVICE If your KENWOOD product ever needs service: Take or ship it to any KENWOOD Authorized Service Center !n the U.S A. along with & complete description of the problem. (if you are uncertain as to whether a Service Center is authorized, please call l-800.KENWOOD for the nearest Service Center.
  • Page 40 This card is necessary to buy the panel again because of theft of damage. e~t~~~: Cette carte est nOcessaire pour se procurer un nouveau panneau dans le cas de perte QU d’endommegeme~t de celui que vous poss8dez. leze kaart is nodig als u een nieuw paneel with aanschaffen in geval van diefstel of beschadiging, Questa scheda 6 necessaris per acquistare un nuovo pannello frontale dopo un furto o danni.
  • Page 41 serf Name of Nam de I’appareil Sales dete f Date d’ what f Data d’ acquisto I Modello detl’appar&chio / Modelo Fecha da wnta Dealer stamp f Cachet du vendeur I Sello del vendedor Signature of Dealer/Signature du vendeur / Firma del vendedor Serial No.
  • Page 43 KISS COMMERCIALS GOOD-BYE. Soon, with your new Sirius-ready Kenwood radio, you can forget the static. Forget commercials with your music. Forget radio that belongs in your grandmother’s car. Get up to 100 new channels- including 50 crystal-clears commercial-free music channels, plus up to 50 more channels of news, sports, and entertainment-all for just $12.95 per month?
  • Page 44 GET UP TO 100 NEW CHANNELS, AN~WH~~~, ANYTIME. .I AZZ Classic Jazz C~~tern~or~ry Jazz Smooth Jazz NDARDS Swing Stcmdards Broadway’s Best lAThI ROCK Latin Hits Rock Specials Latin Love Songs Classic Rock I Rock en Espafiol Classic Rock II Mexicana Alternative I Tejano CLASSICAL...

Table of Contents