Kenwood KDGMPV7019 Instruction Manual page 22

Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
@
When the Securrty Code functron IS activated. the code can't be
changed and the function can't be released.
Note, the Securrty Code can be set as the 4 digit number of your
chorce.
1
Enter Standby
Press the [SRCl button.
Select
the "ALL OFF" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security"/ "SECURITY" is displayed.
3 Enter Security Code mode
Press the [w] or [WI button for at least 1 second.
When "ENTER" is displayed, "CODE" is drsplayed.
4 Select the digits to enter
Press the [H~I or I-1 button.
5 Select the Security Code numbers
Press the [FM] or [AMI button.
6
Repeat steps 4 and 5, and complete the Security Code.
7 Confirm the Security Code
Press the [WI button for at least 3 seconds.
When "RE-ENTER" IS displayed, "CODE" IS displayed.
8
Do the step 4 through 7 operation, and reenter the Security
Code.
"APPROVED" is displayed.
The Securrty Code function activates.
@
When the wrong Code IS entered rn steps 4 through 6, repeat from
step 4.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
2 Do the step 4 through 7 operation, and enter the Security
Code.
"APPROVED" is drsplayed.
The unit can be used.
Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"/ "BEEP ON"
"Beep OFF"/ "BEEP OFF"
Setting
Beep is heard.
Beep canceled.
1
Select Clock Adjustment mode
Press the [FM1 or [AMI button.
Select the "CLK ADJ" drsplay
2 Enter Clock Adjust mode
Press
the [lrr] or [WI] button for at least 1 second.
The clock display blinks.
3 Adjust the hours
Press the [FM1 or [AMI button.
Adjust the minutes
Press the
[WI
or
[WI
button.
4 Exit Clock adjustment mode
Pr%s the [MENU] button.