Kenwood KDGMPV7019 Instruction Manual page 24

Function of the KDC-MPV7019/KDC-MPV61!
You can set the display to a desired color.
1
Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COY drsplay.
2 The color continues to change gradually
Continue pressing the 1~1 or f-11 button.
Release your finger at the color you want.
Quick call up the preset color
Press the [#II - [#41 button.
Button
Color
[#I I
Silky Whrte
WI
Red
I#31
Blue
[#41
Blue Green
Selecting the Color mode
Press the [#61 button.
Each trme the button IS pressed the Color mode swatches as
shown below.
Display Color mode
"Scan" The color changes In sequence.
"SRC" The color changes according to the selected source
"TI m e " The color changes every 6 hours
Keeps the presently set color
Blue fine adjustment
1 Press the [#3] button for at least 2 seconds.
2 Press the [lrr] or [))I] button.
When the blue fine adjustment IS completed, press the [#31
button
The set color memory
Press the [#5] button for at least 2 seconds.
When the setting
in the memory is called up press the [#51
button.
@
The blue fine adjustment setting cannot be stored rn memory.
Function of the KDC-MPV7019/KDC-MPV619/KDC-X459/KDC-41!
Adjusting the display contrast.
Display and Setting
"CONT 0"
"CONT
5" (Origrnal settrng)
"CONT IO"
Function of the KDC-MPV7019/KDC-MPV619/KDC-X459/KDC-419
Dimming this unit's display automatically
when the vehicle light
switch is turned ON.
Display
Setting
"DIM ON"
The display drms.
"DIM OFF"
The drsplay doesn't drm