Kenwood KDGMPV7019 Instruction Manual page 10

Press the [Ql button.
Each time the button is pressed the sound setting switches.
Sound setting
Display
Flat
"Flat"/ "FLAT"
User memory
"User"/ "USER"
Rock
"Rock"/ "ROCK"
Pops
"Pops"/ "POPS"
Easy
"Easy"/ "EASY"
Top 40
"Top40"/ "TOP40"
Jazz
"Jazz"/ "JAZZ"
@
l
User memory: The values set on the <Audio control> (page IO).
l
Each setting value IS changed with the <Speaker setting>
(page
1 I).
First, select the speaker type wth the Speaker setting
Increasing Volume
Press the [A] button.
Decreasing Volume
Press the [VI button.
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD ON" is displayed.
1
Select the source for adjustment
Press the [SRCl button.
2 Enter Audio Control mode
Press the [AUDI button for at least 1 second.
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRCl button.
3 Select the Audio item for adjustment
Press the [FM1 or [AMI button.
Each
time the button IS pressed the Items that can be adjusted
switch as shown below.
4 Adjust the Audio item
Press the [WI or [WHI button.
1
2 Select the Sound type
-lO-