Table of Contents
Advertisement
Getting started
Installation options
3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and
on the telephone base, then press
the other bracket tabs into slots
shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone wall
jack. To mount the telephone on the wall,
position the mounting holes
the telephone outlet mounting studs. Press
and slide the bracket down firmly so the
telephone is held securely on the telephone
outlet mounting studs.
Tabletop mounting
To return the bracket from the wall mount to tabletop position, follow the
directions below.
. Remove the telephone base from the wall.
Unplug the cords from the wall jacks.
Remove the bracket from the telephone
base.
3. Route cords through slots. Plug the
other end of the telephone line cord
into a telephone wall jack. Plug the
large end of the larger power adapter
into an electrical outlet not controlled
by a wall switch.
and
as
and
over
2. Insert the bracket tabs into slots
9
Telephone outlet mounting studs
and
on the telephone base,
then press the other bracket
tabs into slots
and
.
Advertisement
Table of Contents
