Table of Contents
Advertisement
Getting started
Installation options
3. To attach the bracket for wall mounting, insert
the tabs of the bracket into slots
the telephone base, then press the other bracket
tabs into slots
4. Plug the power adapter into an electrical out-
let not controlled by a wall switch. Plug the
telephone line cord into a telephone wall jack.
To mount the telephone on the wall, position
the mounting holes
outlet mounting studs. Press and slide the bracket
down firmly so the telephone is held securely on
the telephone outlet mounting studs.
Tabletop mounting
To return the bracket from the wall mount to tabletop position, follow the
directions below.
from the telephone base.
of the telephone line cord into a telephone
wall jack. Plug the large end of the larger
power adapter into an electrical outlet not
controlled by a wall switch.
and
as shown on the right.
and
over the telephone
and
on
Telephone outlet mounting studs
2. Insert the bracket tabs into slots
and
press the other bracket tabs into
slots
9
on the telephone base, then
and
.
Advertisement
Table of Contents
