Tabletop Mounting - AT&T E1812B User Manual

Getting started
Installation options
3. To attach the bracket for wall mounting, insert
the tabs of the bracket into slots
telephone base, then press the other bracket tabs
into slots and
4. Plug the power adapter into an electrical outlet
not controlled by a wall switch. Plug the telephone
line cord into a telephone wall jack. To mount the
telephone on the wall, position the mounting holes
and over the telephone outlet mounting
studs. Press and slide the bracket down firmly so
the telephone is held securely on the telephone
outlet mounting studs.

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the
directions below.
from the telephone base.
of the telephone line cord into a telephone
wall jack. Plug the large end of the larger
power adapter into an electrical outlet not
controlled by a wall switch.
and
as shown on the right.
on the
Telephone outlet mounting studs
2. Insert the bracket tabs into slots
and
press the other bracket tabs into
slots
9
on the telephone base, then
and
.