Tabletop Mounting - AT&T E1802B User Manual

Getting started
Installation options
3. To attach the bracket for wall mounting, insert
the tabs of the bracket into slots
the telephone base, then press the other bracket
tabs into slots
4. Plug the power adapter into an electrical outlet
not controlled by a wall switch. Plug the tel-
ephone line cord into a telephone wall jack. To
mount the telephone on the wall, position the
mounting holes
outlet mounting studs. Press and slide the brack-
et down firmly so the telephone is held securely
on the telephone outlet mounting studs.

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the
directions below.
1. Remove the telephone base from the wall. Unplug
the cords from the wall jacks. Remove the bracket
from the telephone base.
3. Route cords through slots. Plug the other end
of the telephone line cord into a telephone
wall jack. Plug the large end of the larger
power adapter into an electrical outlet not
controlled by a wall switch.
and as shown on the right.
and over the telephone
and on
Telephone outlet mounting studs
2. Insert the bracket tabs into slots
and
press the other bracket tabs into
slots
9
on the telephone base, then
and
.