Intercom - AT&T E2913B User Manual

TONE TONE
MUTE REDIAL
DELETE PAUSE
HANDSET 
2:45PM
INTERCOM TO:

INTERCOM

:
NOTE At any time, a
maximum of two hand-
sets can be used on an
intercom call, and
another handset
can be used on an out-
side call at the same
time.
Telephone operation
Intercom
Use the intercom feature for conversations between
handsets.
. Press INT. The screen of the originating handset
will show INTERCOM TO:.
MUTE REDIAL
DELETE PAUSE
2. Enter the handset number of the destination handset (,
2 or 3). The display will show CALLING HANDSET X.
The destination handset will ring, and its screen
will show HANDSET X IS CALLING.
•
•
3. On the ringing destination handset, press
(0-9, * or #) to answer the intercom call.
To end the intercom call:
• Press
-OR-
• Place either handset in the charger or telephone
base.
Handling incoming calls
The telephone will beep if you receive an outside call
during an intercom conversation. You can either:
• Press
and answer the incoming call.
-OR-
• Press INT or
intercom connection without answering the
incoming call. The incoming call will continue to
ring.
NOTES:
Before the intercom call is answered, you can cancel the
intercom call by pressing
If the destination handset is not answered within 00
seconds or if it is in the directory or call log mode, or out
of range, the originating handset will show the message
NOT AVAILABLE.
PHONE , INT,
/FLASH
:
NOTE On the ringing destination handset, pressing
or MUTE/ will temporarily silence the intercom ringer.
DELETE
OFF
/CLEAR
PHONE
/FLASH
OFF
6 6
OFF/ or INT.
CLEAR
SPEAKER, or any dial pad key
or INT on either handset.
to end the intercom call
to disconnect the
/CLEAR
OFF/
CLEAR