Table of Contents
Advertisement
Getting started
Installation options
3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and
on the telephone base, then press
the other bracket tabs into slots
as shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone
wall jack. To mount the telephone on the
wall, position the mounting holes
over the telephone outlet mounting studs.
Press and slide the bracket down firmly
so the telephone is held securely on the
telephone outlet mounting studs.
Tabletop mounting
To return the bracket from the wall mount to tabletop position, follow the
directions below.
1. Remove the telephone base from the wall.
Unplug the cords from the wall jacks.
Remove the bracket from the telephone
base.
3. Route cords through slots. Plug the
other end of the telephone line cord
into a telephone wall jack. Plug the
large end of the power adapter into
an electrical outlet not controlled by
a wall switch.
and
and
Telephone outlet mounting studs
2. Insert the bracket tabs into slots
and
then press the other bracket
tabs into slots
9
on the telephone base,
and
.
Advertisement
Table of Contents
